$6.23
CONFIRM THE PART FITS
Part Information
Auger drive belt 37X120MA is an original equipment manufacturer (OEM) part that fits some Craftsman, Canadiana, Dynamark, MTD, Murray, Noma and Signature snowblowers.
Auger drive belt 37X120MA rotates the auger on the snowblower.
This V-belt has a 0.5-inch top width and is 35.6 inches long.
Replaces original snowblower auger drive belt part numbers 322589, 581264, 583063 and 37X120.
Fits the following Craftsman snowblower models: Craftsman 536881650, 536881651, 536881750, 536884780, 536884781, 536884790, 536884791, 536884821, 536884822, 536885470, 536885471, 536885472, 536885473, 536886110, 536886120, 536886121, 536886122, 536886140, 536886141, 536886150, 536886160, 536886161, 536886180, 536886190, 536886191, 536886260, 536886261, 536886330, 536886440, 536886450, 536886460, 536886530, 536886531, 536886540, 536886610, 536888400, 84728, 88416, 88417, 88427, C950-52005-0, C950-52009-0, C950-52318-3 and C950-52340-3.
Also fits snowblower models in these series: Canadiana F2254-010, F2350-000, F2484-010, G2254010 and G2484-010; Dynamark DY-824-1, G2484-010 and G2254010; MTD 624804X81; Murray 622504X8, 624508X4B, 624604X35 and 624604X81; Noma DP826E585317; and Signature DY-824-1, F2254-010, F2350-000, F2484-010, G2254010 and G2484-010.
Frequently Used Together
- $11.49 |15% OFF Phone Price : $13.49
- $7.14
- $7.60
- $6.89 |13% OFF Phone Price : $7.89
- $6.69
- $5.56 |15% OFF Phone Price : $6.56
- $58.84 |8% OFF Phone Price : $63.84
- $17.09 |10% OFF Phone Price : $19.09
- $25.00 |17% OFF Phone Price : $30.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #F2254-010 Signature gas snowblower | F2254-010 | Engine |
| Model #536881650 Craftsman gas snowblower | 536881650 | Engine |
| Model #DP826E585317 Noma gas snowblower | DP826E585317 | Motor mount assembly |
| Model #536886161 Craftsman gas snowblower | 536886161 | Engine assembly |
| Model #536881750 Craftsman gas snowblower | 536881750 | Engine |
| Model #DY-824-1 Signature gas snowblower | DY-824-1 | 4 and 5 h.p. motor mount assembly |
| Model #624804X81 MTD gas snowblower | 624804X81 | Engine assembly |
| Model #G2254010 Signature gas snowblower | G2254010 | Engine assembly |
| Model #G2254010 Dynamark gas snowblower | G2254010 | Engine assembly |
| Model #F2484-010 Signature gas snowblower | F2484-010 | Motor mount assembly |
Reviews
Part were exact match
Fit like a glove , after install. Machine worked.. bring the snow
Edgardo, Passaic, nj
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Absolute go to place for replacement parts
The Perfect fit for my obsolete craftsman snowblower
Martin, Fonda NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Auger belt
It fit perfectly on my older Craftsman snowblower model 536 886440
Jack U, Elida, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Very Expensive Compared to other options
The product was touted as OEM but a Murray belt arrived-could have paid a lot less and avoided the shipping fee. Have not used yet.
Snookered, Columbus Ohio
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy install
Fast shipping. Looked difficult to install but was easy
Scott, Geneva
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to Install
Took me 10 minutes to install. Was up and running in no time.
keithpaw, Portage Michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Belt is too large for older snow blower
While I am able to use this belt, it is a bit too large for my auger gears. As a result it will slip off the lower wheel if the control is released too quickly. If you gently release the gear it stays on. Installation wasn't too hard, but required removing both the upper cover and the bottom plate of the blower.
John G, Los Alamos New Mexico
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
snowblower belt
The belt fit perfectly, shipping was fast and in good condition.
willey, bethlehem, pa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend