$64.99 |
7% OFF Phone Price : $69.99
CONFIRM THE PART FITS
Part Information
This door seal (part number WP99003337) is for dishwashers.
Door seal WP99003337 seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and leave the door closed for several hours to properly seat the new door seal.
Frequently Used Together
- $9.89 |9% OFF Phone Price : $10.89
- $350.80 |$10.00 OFF Phone Price : $360.80
- $53.29 |9% OFF Phone Price : $58.29
- $8.49 |11% OFF Phone Price : $9.49
- $4.39 |19% OFF Phone Price : $5.39
- $34.08 |13% OFF Phone Price : $39.08
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #JDB1270AWY Jenn-Air dishwasher | JDB1270AWY | Tub |
| Model #MDB8750AWS Maytag dishwasher | MDB8750AWS | Tub |
| Model #MDB8750AWW Maytag dishwasher | MDB8750AWW | Tub |
| Model #JDB1060AWS Jenn-Air dishwasher | JDB1060AWS | Tub |
| Model #ADB3500AWW Amana dishwasher | ADB3500AWW | Tub |
| Model #MDBH975AWS Maytag dishwasher | MDBH975AWS | Tub |
| Model #JDB1100AWB Jenn-Air dishwasher | JDB1100AWB | Tub |
| Model #MDB8951AWS10 Maytag dishwasher | MDB8951AWS10 | Tub |
| Model #JDB1250AWB Jenn-Air dishwasher | JDB1250AWB | Tub |
| Model #JDB1250AWS Jenn-Air dishwasher | JDB1250AWS | Tub |
Reviews
Installing Dishwasher Dore Seal
Watch the installation video, it explains everything you need to know to install the Door Seal.
Mrs. G, Edmonds, WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
easy to install and perfect fit
Exact part replacement. I pulled the old gasket out and put the new one in - easy job.
wsff, Boston
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Maytag dishwasher door seal
Original seal was in bad shape, it was just a matter of time that it would start to leak. Before removing the seal, I took photos with my camera of the area by the hinge or at the bottom of the door. So that I would make sure I placed the new seal in the same location. As I removed the seal slowly, I stopped and looked at the way the seal was placed in the groove it was seating in. I matched it to the new seal and made a couple of small "x" 's on the part of the seal facing the front.(I used a silver sharpie) So that I would make sure I did not place the seal wrong. The area the seal was seated in, or the groove had a lot of buildup of gunk. In a 3 gallon bucket I poured about 1/2 cup of vinegar in a gallon of water. A soaked a rag rag in this solution, wrung the rag and cleaned the groove the seal was in and cleaned the gunk buildup at the bottom of the door and in the the groove the seal was seated in. I was pleased at the results. This is what I used, you are welcome to use what works best for you. I placed the new seal in the groove making sure the "x" 's were facing the front. Seal was centered, closed the door, felt tighter than the old seal did. Good as new.
Little J, Fountain, CO
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes