CONFIRM THE PART FITS
Range Surface Element Control Switch 316049800
Part #316049800
Part Information
This surface element control switch (part number 5304528972) is for ranges.
Surface element control switch 5304528972 turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #TEF367CCSB Tappan electric range | TEF367CCSB | Backguard |
Model #FEF388WCCE Frigidaire electric range | FEF388WCCE | Backguard |
Model #TEF387CCTA Tappan electric range | TEF387CCTA | Backguard |
Model #FEF377BAWB Frigidaire electric range | FEF377BAWB | Backguard |
Model #FEF388WCCF Frigidaire electric range | FEF388WCCF | Backguard |
Model #FEF377BAWD Frigidaire electric range | FEF377BAWD | Backguard |
Model #TEF362BBBB Tappan electric range | TEF362BBBB | Backguard |
Model #FEF389WESD Frigidaire electric range | FEF389WESD | Backguard |
Model #FEF377BADD Frigidaire electric range | FEF377BADD | Backguard |
Model #FEF388WCCC Frigidaire electric range | FEF388WCCC | Backguard |
Reviews
I have always used Sears Kenmore kitchen appliance
The control switch was the correct one , installed in minutes, and works just as it should.
Brother L, Elkton Maryland
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy Installation
It was easy to install and person on the phone made sure I ordered the part that I needed. Very satisfied. Make sure to mark wires or take picture before disconnecting old switch so you connect wires on new switch correctly.
Max29, BROWNSTOWN , INDIANA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
switch install
easy and took only 20 min took off back of main board popped two screw moved 5 connectors and done
dirk67855, washington
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Stove heating element control switch replacement
Start to finish took about the 20 minutes, very simple to do.
Mike 1, Ronceverte, WV
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour