Owner’s manual
Who made Craftsman tool boxes?
For newer Craftsman tool boxes and tool storage (including the Craftsman 706116180 side cabinet), the Craftsman brand is owned by Stanley Black & Decker, and many current Craftsman tool storage products are produced through Stanley Black & Decker manufacturing and supplier networks. For exact origin details for a specific run, check the label on the cabinet and the owner's manual.
What you can use to identify the actual maker of your box
Because “Craftsman” is a brand name used across multiple product generations, the most reliable way to identify who made a specific tool chest is to match the model and manufacturing label information.
- Find the model number and serial or date code on the cabinet label
- Note the manufacturing location (if listed) and any factory code
- Check the drawer slide style and lock cylinder type (often consistent by manufacturer)
- Compare the model number (706116180) to the documentation and parts diagrams in the manual
- Keep photos of the label for future parts lookups and service questions
Where to look on a Craftsman 706116180 side cabinet
Most tool storage cabinets place the ID label in one of these spots:
- Inside the top drawer side wall
- On the back panel near the bottom
- Inside the door (for side cabinets)
- Along the frame near the caster plate (if equipped)
Quick guide: brand owner vs. manufacturer
| Term | What it means | What to check |
|---|---|---|
| Brand owner | Company that owns the Craftsman name | Current Craftsman ownership information |
| Manufacturer | Company/factory that built your cabinet | Cabinet label, date code, country of origin |
| Model number | Identifies the design family | 706116180 on the label and in the manual |
Why it matters
Knowing who made your Craftsman tool box helps you match hardware correctly (locks, keys, drawer slides, handles, and fasteners) and avoid ordering look-alike parts that do not fit your specific tool storage design.
Last updated: February 2026
Do the drawers come out of a Craftsman tool chest?
Yes. The drawers in a Craftsman tool chest like model 706116180 are designed to be removable so you can clean the cabinet, service the slides, or replace a damaged drawer. Most drawers release by using the slide levers (or tabs) on each side, then pulling the drawer straight out.
How to remove a drawer (typical slide-release method)
- Empty the drawer to reduce weight and prevent tipping.
- Pull the drawer fully open until it stops.
- Look for a release lever or tab on each slide (one on the left, one on the right).
- Press the levers (often one side goes up while the other goes down) to disengage the stops.
- While holding the levers, pull the drawer forward and out.
- Set the drawer on a flat surface; avoid bending the slide members.
Reinstalling the drawer
- Extend both cabinet slides evenly.
- Align the drawer slide members with the cabinet slides.
- Push the drawer in smoothly until it seats and clicks past the stops.
- Open and close the drawer a few times to confirm it glides and latches correctly.
Quick troubleshooting if it will not release
| Symptom | Most common cause | What to do |
|---|---|---|
| Drawer stops and will not lift out | Release levers not fully engaged | Re-open fully and press both levers at the same time |
| Drawer binds or feels twisted | Cabinet not level or drawer overloaded | Level the chest; reduce load and try again |
| Slide will not move smoothly | Debris or bent slide | Clean slide tracks; inspect for damage before forcing |
Why it matters
Removing drawers the right way prevents bent slides, broken release tabs, and misaligned drawer tracks, which are the most common reasons a tool chest drawer starts sticking.
For model-specific drawer and slide details, use the owner's manual.
Last updated: February 2026
Where can I buy Craftsman replacement parts?
You can buy replacement parts for your Craftsman side cabinet model 706116180 through Sears PartsDirect by searching the model number and matching the part to your cabinet’s diagram and hardware list in the owner's manual. This is the most reliable way to get the correct fit for your exact model.
Best way to shop parts for model 706116180
Use your model number first, then confirm the part by description and location on the cabinet.
- Look up Craftsman 706116180 and open the parts list for tool storage parts
- Compare the part name to the cabinet section it belongs to (drawer, slide, lock, caster, handle)
- Match finish and size (for example, black vs. chrome hardware, left vs. right slide)
- If your cabinet has a lock, match the key code or lock style before ordering
- Order all related hardware at the same time (screws, clips, retainers) when applicable
What to check before you order (to avoid wrong parts)
Even small differences in tool storage hardware can prevent proper drawer operation.
| What to verify | Why it matters | Quick check |
|---|---|---|
| Model number | Ensures correct parts list | Confirm it reads 706116180 |
| Drawer count and layout | Slides and handles vary by drawer | Count drawers and note widths |
| Left vs. right parts | Slides and brackets are often handed | Check orientation on the cabinet |
| Locking vs. non-locking | Lock bars and cylinders differ | Look for a keyed lock on the top/front |
Why it matters
Tool storage parts like drawer slides, latches, and locks are fit-critical. Ordering by the exact model number helps ensure drawers close smoothly, lock correctly, and stay aligned under load.
Last updated: February 2026
How much is a Craftsman 26 in 3 drawer steel heavy duty middle tool chest box storage cabinet?
The price for a Craftsman 26-inch, 3-drawer steel heavy-duty middle tool chest can vary by seller, promotions, and availability; for the Craftsman model 706116180 (tool storage side cabinet), we use the pricing shown on the product listing at the time you’re shopping. For model-specific details and configuration, check the owner's manual.
What affects the price you see
- Current promotions or markdowns (sale price vs. regular price)
- Whether the item is in stock or limited availability
- Shipping and delivery options to your ZIP code
- Condition (new vs. open-box, if offered)
- Included hardware or accessories (casters, drawer liners, keys)
Quick price check guide
Use this checklist so you’re comparing the same cabinet:
- Confirm the model number on the label is 706116180
- Verify it’s a 26-inch middle tool chest with 3 drawers
- Match the finish and construction (steel, heavy-duty)
- Check what’s included (keys/lock set, drawer slides, mounting hardware)
Typical price display elements
| Price element | What it means | Why it matters |
|---|---|---|
| List price | Regular non-sale price | Baseline for comparison |
| Sale price | Discounted current price | What you usually pay today |
| Savings | Difference between list and sale | Helps judge the deal |
| Percent off | Savings as a percentage | Quick value comparison |
Why it matters
Tool storage pricing changes often, and small differences in configuration (drawer slide type, lock style, included hardware) can change the price. Verifying the exact Craftsman model number keeps you from buying the wrong cabinet or mismatched replacement hardware later.
Last updated: February 2026
What size is a Craftsman 3 drawer tool box?
A Craftsman 3-drawer tool box size depends on the exact model; the Craftsman 706116180 page is for a tool chest/side cabinet, not a portable 3-drawer tool box. For the correct dimensions for your specific Craftsman unit, use the measurements section in the 706116180 owner's manual or measure the box directly.
How to get the right dimensions (fast)
Use one of these methods so you get a size that matches your exact tool box:
- Check the product dimensions listed in the 706116180 owner's manual
- Measure the overall width: outside left edge to outside right edge
- Measure the overall height: floor/casters to the top surface (include handle if fixed)
- Measure the overall depth: front face to the farthest rear point (include latches)
- If you need drawer fit, measure drawer interior width, depth, and height
Typical 3-drawer tool box size ranges
Most portable 3-drawer metal tool boxes are built to be carryable and bench-friendly.
| Measurement | Typical range | Why it matters |
|---|---|---|
| Width | 18 to 22 in | Shelf and bench fit |
| Height | 10 to 14 in | Clearance under shelves |
| Depth | 8 to 12 in | How far it projects on a shelf |
Why it matters
Using the correct width, height, and depth prevents fit problems in a tool chest bay, on shelving, or in a truck bed; it also helps you choose compatible drawer liners and organizers so drawers slide freely.
Last updated: February 2026