Craftsman 572247200 15" motorized scroll saw sander Parts

No. Scroll saw blades are not universal; your Craftsman 572247200 15-inch motorized scroll saw sander must use a blade style that matches its blade clamps (pin-end or plain-end) and the cutting job (wood, plastic, or thin metal).

What “fits” really means on a scroll saw

Blade compatibility comes down to a few physical details:

• Blade end type: pin-end vs plain-end (pinless)
• Blade length: most are around 5 inches, but not all clamps accept every length
• Blade thickness and width: thicker blades track straighter but turn wider
• Tooth pattern: skip tooth, double skip, reverse tooth, spiral, etc.
• Material: high-carbon steel vs bi-metal for tougher materials

Quick compatibility checklist (before you buy)

Use this checklist for the Craftsman 572247200 and most 15-inch scroll saws:

• Confirm whether your saw uses pin-end or plain-end blades
• Check that the blade can be tensioned properly without bottoming out the tension knob
• Match teeth to the cut: fine teeth for tight curves and thin stock; coarser teeth for faster straight cuts
• Choose the right blade direction (standard vs reverse tooth) to control bottom-side tear-out
• Avoid forcing a blade that is too thick; it increases vibration and breakage

Common blade types and when to use them

Blade type	Best for	Trade-off
Pin-end	Fast changes, beginner use	Less detail control, fewer specialty options
Plain-end (pinless)	Fine detail and tight turns	Requires compatible clamps and a bit more setup
Reverse tooth	Cleaner bottom edge	Slightly slower cutting
Spiral	Cutting in any direction	Rougher edge, harder to control

Why it matters

Using the wrong blade style can cause poor tracking, excessive vibration, frequent blade breaks, and rough cuts. Matching the blade to the clamp type and material gives cleaner scroll work and protects the saw’s blade holders and tensioning system.

For help locating the exact model number on the tool before ordering blades or parts, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026

For the Craftsman 572247200 15-inch motorized scroll saw sander, use pinned (pin-end) scroll saw blades. This saw’s blade holders are designed for pin-end blades, so pinless (plain-end) blades do not mount correctly and will not tension or track safely.

What to buy for model 572247200

Pinned blades are the correct fit; choose the tooth style and size based on your material and the kind of cut.

• Pinned (pin-end) blades: correct mounting style for this saw
• Fine-tooth pinned blades: best for tight curves, thinner stock, smoother edges
• Coarse-tooth pinned blades: faster cutting in thicker softwood, rougher finish
• Spiral pinned blades (if available): cut in any direction, useful for complex patterns
• Metal/plastic-rated pinned blades: use the blade type matched to the material

Quick comparison (for this model)

Blade end type	Fits Craftsman 572247200?	Best use on this saw
Pinned (pin-end)	Yes	All normal cutting and inside cuts (with larger entry holes)
Pinless (plain-end)	No	Not compatible with the blade clamps

Practical selection rules (fewer breaks, cleaner cuts)

• Match blade size to thickness; smaller blades turn tighter, larger blades cut thicker stock straighter.
• Use steady feed pressure; forcing the work is the top cause of broken blades.
• Set proper tension; too loose wanders, too tight snaps.
• For inside cuts, drill an entry hole sized for a pinned blade; pinned blades need a larger hole than pinless.

Why it matters

Using the correct pin-end blade keeps the blade clamped and tensioned correctly, which improves control, reduces blade breakage, and helps the saw cut square and safely.

For general safety steps before changing blades or adjusting tension, use are diy appliance repairs safe.

Last updated: February 2026

The model number for your Craftsman scroll saw is printed on the tool’s model/serial tag. On the Craftsman 572247200 15-inch motorized scroll saw sander, that tag is usually on the rear of the saw body, the base, or near the motor housing.

Where to look on a scroll saw

Check these common locations (wipe off dust first so the label is readable):

• Back of the saw frame or rear cover
• Side of the base or stand mounting area
• Near the motor housing or ventilation openings
• Under the table lip (front edge or underside)
• Bottom of the base (you may need a flashlight)

What the label looks like

Most Craftsman power tools use a small sticker or metal plate that includes:

• Model number (you want 572247200)
• Serial number (unique to your specific saw)
• Electrical rating (volts, amps, Hz)
• Manufacturer information

Quick check: model vs. serial

Item	What it tells you	When you need it
Model number	The exact product design	Ordering the correct parts and diagrams
Serial number	Your specific unit’s build ID	Service history, production variations

Why it matters

Using the exact model number (including all digits) ensures you get the right Craftsman parts list, diagrams, and compatible replacements for your 572247200 scroll saw.

If the tag is missing or unreadable

Use these practical options:

• Look for the model number stamped into the base or frame (less common, but possible)
• Check your original receipt, packaging, or any registration paperwork
• Compare the saw’s key features (table style, blade clamp type, sander attachment) to confirm you have the 572247200
• Use our guide: [how to find your appliance model number (and what it means for parts)]

Last updated: March 2026