Whirlpool UMV1170LS0 microwave/hood combo Parts

For your Whirlpool UMV1170LS0 microwave/hood combo, the wattage is typically listed on the model and serial tag (often found on the oven frame behind the door) and sometimes on the product rating label. If you cannot find a wattage number, you can still estimate cooking power by doing a simple water-heating test.

Check these common label locations on over-the-range units like the UMV1170LS0:

• Open the door and look along the oven frame (around the door opening)
• Check the inside edge of the door area for a model and serial tag
• Look behind the upper grille area if your unit has a visible rating label there
• If the microwave is installed over a range, use a flashlight and look up under the control panel area

If you cannot find the wattage on the label, this test helps you compare performance to typical microwave wattage ranges.

• Measure 1 cup (8 oz) of room-temperature water
• Record the starting temperature (optional but helpful)
• Heat on High for 2 minutes
• Compare how hot it gets to what you expect from a typical 900 to 1100 watt microwave

If heating seems weak or inconsistent, use our troubleshooting guide: why is my microwave not heating.

Wattage affects cook times, defrost performance, and whether packaged-food instructions match your results. Knowing the wattage also helps when diagnosing heating issues tied to high-voltage components.

If you are troubleshooting a no-heat condition, common related parts for this model include the microwave magnetron W10754299, capacitor W10850446, and gaoxin-hvd c W11256462.

Last updated: February 2026

Most Whirlpool microwaves, including over-the-range microwave/hood combos like model UMV1170LS0, typically last 7 to 10 years with normal household use. Heavy daily use, poor ventilation, and repeated power surges shorten life; regular cleaning and proper airflow help it reach the high end of that range.

Many “end of life” symptoms are tied to a few common systems:

• No heat but everything else runs: often points to the high-voltage circuit (magnetron, capacitor, diode)
• Dead display or random resets: commonly control or power-supply related
• Runs then stops: can be a safety thermostat opening from overheating
• Blows the house breaker or goes completely dead: can involve a fuse or shorted component
• Loud buzzing or burning smell: stop using it and inspect for arcing or failed high-voltage parts

If your UMV1170LS0 is not heating, our troubleshooting steps in why is my microwave not heating help narrow down the most likely cause.

Some repairs are straightforward and can keep a good unit going longer, especially when the cavity and door are in good shape.

A microwave/hood combo works harder than a countertop unit because it also manages cooking smoke and heat. Keeping airflow clear (grease filter clean, vents unobstructed) reduces heat stress on the electronic control and safety thermostats, which directly impacts lifespan.

• Clean the grease filter regularly and keep the intake area clear
• Avoid running the microwave empty (it stresses the magnetron)
• Use microwave-safe cookware only (prevents arcing and cavity damage)
• Wipe spills quickly to prevent corrosion and burned-on residue
• Use a surge protector rated for the circuit (where appropriate) to reduce control-board damage

Last updated: February 2026

No. Whirlpool microwaves are not all the same size; even within the same brand, dimensions and capacity vary by style (countertop, built-in, or over-the-range). For your Whirlpool UMV1170LS0 microwave/hood combo, use the model-specific measurements when planning cabinet fit and venting clearance.

Even when two units look similar, these specs often differ:

• Overall width/height/depth (cabinet fit and door swing clearance)
• Interior capacity (cubic feet)
• Mounting and venting layout (top or rear exhaust, recirculating)
• Electrical requirements (dedicated circuit needs)
• Trim kit or built-in cutout requirements (built-in models)

These ranges are common across many Whirlpool microwave types:

Because fit is model-specific, we recommend these checks before ordering parts or planning an install:

• Match the full model number UMV1170LS0 on the rating label.
• Measure the existing opening (width, height, depth) and note any trim or cabinet lip.
• Confirm venting direction (recirculating vs. outside vent) and duct location.
• Verify mounting hardware compatibility if you are replacing the unit; the bracket pattern can differ.
• If you need mounting hardware, use the model-matched microwave mounting plate W11025649.

Microwave size affects more than appearance. A mismatch can cause cabinet interference, poor door clearance, misaligned ducting, and extra installation work. Using UMV1170LS0-SPECIFIC fit details helps avoid returns and rework.

Last updated: February 2026

Your Whirlpool UMV1170LS0 microwave/hood combo has a 1.7 cu. ft. cooking capacity. This is the interior cavity volume (not the exterior size), and it helps you judge what cookware fits and what replacement accessories, like the turntable, should match.

Capacity is the usable cooking cavity volume. For most households, 1.7 cu. ft. is a practical mid-range size for an over-the-range microwave.

• Fits most standard dinner plates and medium casserole dishes
• Gives more usable space than compact 1.1 cu. ft. units
• Helps when comparing replacement turntables and racks by model fit
• Does not indicate vent fan airflow (CFM) or exterior dimensions

When you replace interior or fit-sensitive items, using UMV1170LS0-COMPATIBLE parts helps avoid clearance and seating issues.

• Turntable gl W11367904 (glass tray that must fit the cavity and roller path)
• Driver, turntable W11245707 (coupler that drives tray rotation)
• Filter W10208631A (grease filter for the hood section)

Knowing the correct cubic feet helps you choose cookware that rotates freely, avoid overheating from blocked airflow, and ensure replacement parts fit and function correctly.

Last updated: February 2026