Owner’s manual
Where is the model number on a Craftsman tool box?
On a Craftsman tool chest like model 706105950, the model number is typically on the identification label or service parts information for the unit. For this series, the owner's manual also prompts you to record the model number from the service parts drawing.
Most common places to check on the tool chest
Look in these spots first (use a flashlight and wipe dust off the surface):
- Inside the top drawer area (side wall, back wall, or underside of the top lid/cover)
- On the back panel (label or stamped number)
- On an end panel or end brace near the drawer slides
- Along a vertical frame support near the drawers
- Near the lock cylinder area (sometimes on the frame close to the lock)
How to confirm you have the right model number
We recommend matching more than one detail so you order the correct drawer slides, casters, or lock parts.
| What to match | What you should see | Why it helps |
|---|---|---|
| Model number | 706105950 | Identifies the exact tool chest family |
| Product type | Tool chest / roll-away style storage | Confirms you are in the right parts category |
| Features | Locking drawers, removable drawers, caster base (on roll-aways) | Narrows down similar-looking chests |
Why it matters
Craftsman tool chests often look alike across different production runs, but drawer slide style (lever-release vs tab-release), caster mounting hardware, and lock components can vary by model. Using the correct model number helps ensure parts fit and drawers operate safely.
Quick safety reminder while checking
- Lock the drawers before moving the chest.
- Avoid opening more than one drawer at a time; the chest can become unstable.
- Do not stand or step on drawers.
Last updated: February 2026
Where can I buy Craftsman replacement parts?
You can buy replacement parts for your Craftsman tool chest model 706105950 through Sears PartsDirect by searching the model number and using the service parts drawing to identify the exact hardware or component you need. For part identification details, use the owner's manual.
How we recommend finding the right part
- Confirm the model number on the tool chest ID label: 706105950
- Use the service parts drawing to match the part name and location
- Note any hardware size/type (for example M4 pan head screw, M6 hex screw, M8 hex screw)
- Check whether the part relates to common assemblies (casters, handle, drawer slides, lock)
- Order the exact match to avoid fit and finish issues
Common replacement items for this tool chest
Even when you are not sure what to call a part, these are the most common service items customers replace:
| Area | Typical parts you may need | What it affects |
|---|---|---|
| Mobility | Casters, caster hardware | Rolling, stability, brake function |
| Access | Lock and keys, lock cylinder | Securing drawers and cover |
| Drawers | Drawer slides, release tabs/levers, liners | Smooth opening/closing, drawer retention |
| Assembly | Screws and fasteners (M4/M6/M8) | Handle and caster mounting strength |
Why it matters
Tool chests like the Craftsman 706105950 rely on correct hardware and properly fitted drawer slide components for safe use. Using the correct service part helps prevent drawer misalignment, sticking slides, and instability when multiple drawers are open.
Quick safety reminders while you repair
- Do not stand on the tool chest
- Open only one drawer at a time to reduce tip risk
- Lock drawers before moving the chest
- Use brakes when parked
- Keep the chest on level surfaces
Last updated: February 2026
How to unlock Craftsman tool chest drawers?
To unlock the drawers on your Craftsman 706105950 tool chest, close all drawers completely, then turn the lock fully to the right. If a drawer is slightly open or the cabinet is racked, the lock bar can bind and keep drawers from releasing; re-square the chest and try again. See the owner's manual for the lock and drawer-slide details.
Quick unlock checklist
- Push every drawer fully closed (check for a drawer that is out by even 1/8 inch).
- Turn the key/lock cylinder fully to the right (do not stop mid-turn).
- While turning the key, gently press the drawer fronts inward to relieve pressure on the lock bar.
- If the chest is on casters, set it on a level surface and avoid twisting the frame.
- If the top cover is open on a combo unit, close it fully before trying to unlock.
If the drawers still will not open
Most “locked but stuck” situations are caused by misalignment, a jammed slide, or a lock that needs lubrication.
| Symptom | Most likely cause | What to do |
|---|---|---|
| Key turns but drawers stay stuck | One drawer not fully closed | Find the proud drawer and push it fully shut, then unlock again |
| Key is hard to turn | Lock bar binding from cabinet twist | Roll to a flat spot, square the cabinet, then retry |
| Drawer moves 1/4 inch then stops | Slide stop engaged or slide jam | Remove the drawer (see steps below), inspect slides, reinstall |
| Lock feels gritty | Dry lock cylinder | Lubricate with graphite (yearly is typical) |
Removing a drawer to clear a jam
- Empty the drawer.
- Fully extend it.
- Release both slide levers or tabs (one on each side), then pull the drawer out.
- Reinstall by aligning the slides and pushing in until it stops.
Why it matters
Forcing a locked or bound drawer can bend the lock bar, damage the drawer slides, and make the tool chest unsafe to move. Keeping drawers aligned and slides lubricated helps the lock work smoothly and prevents repeat sticking.
Last updated: February 2026
Who made Craftsman tool boxes?
Craftsman is a brand, and tool boxes have been produced by different manufacturers over time. For Craftsman tool chest model 706105950, the owner's manual identifies it as a Craftsman chest distributed under the Craftsman name; the most reliable way to pin down the actual manufacturer is the data plate and service parts drawing for your exact unit.
How to identify the maker for your specific Craftsman chest
Use the label on the tool chest first, then match it to the documentation.
- Find the data plate (often inside a top lid, on a cabinet back panel, or inside a drawer area)
- Confirm the model number is 706105950
- Record any additional identifiers: serial number, production code, or factory code
- Check the service parts drawing referenced in the manual for supplier or assembly identifiers
- Compare hardware style (drawer slide release type, lock cylinder style, caster mounting) to the parts drawing
What the manual tells you for model 706105950
The manual for this Craftsman chest family provides operating and safety guidance and points you to the service parts drawing for service parts identification.
| Item | What to look for | Why it helps |
|---|---|---|
| Brand/distribution | Craftsman distribution information | Confirms product line and documentation set |
| Service parts drawing | Parts breakdown and identifiers | Best source for matching correct replacement hardware |
| Safety/operation notes | Drawer and stability warnings | Helps prevent tip-over and damage |
Why it matters
Knowing the exact maker is less important than matching the correct service parts. Tool chests often share similar handles, casters, locks, and drawer slides across multiple lines, so the model number and service parts drawing are what keep you from ordering the wrong hardware.
Quick safety checks we recommend
- Do not open multiple loaded drawers at once; the chest can become unstable
- Lock drawers before moving the unit
- Do not stand or step on drawers
- Bolt stacked units together when required
Last updated: February 2026
How much is a Craftsman 26 in 3 drawer steel heavy duty middle tool chest box storage cabinet?
The price of a Craftsman 26-inch 3-drawer middle tool chest varies by listing and promotions, so the best way to confirm you are pricing the correct unit is to match the model number on the label. For model 706105950, use the 706105950 owner's manual to verify the exact configuration before you compare prices.
How to make sure you are pricing the right Craftsman chest
Use these checks so you do not compare a top chest, roll-away, or a different drawer count.
- Match the model number 706105950 on the product label or service parts drawing
- Confirm it is a middle chest (not a top chest or base cabinet)
- Verify the drawer count and overall size (many 26-inch chests look similar)
- Check whether mounting brackets and hardware are included with the listing
- Compare delivery, shipping, and assembly costs as part of the total price
Specs from the Craftsman guidance that affect value and safe use
The Craftsman manual for these stainless steel chests and cabinets includes key limits and safety rules you should compare between listings.
| Item to compare | What to look for | Why it matters |
|---|---|---|
| Drawer load rating | 75 lb maximum per drawer | Prevents slide damage and drawer binding |
| Stacking method | Stacked products should be bolted together | Reduces tip-over risk |
| Safe use | Do not stand on the chest; avoid opening multiple drawers | Helps prevent injury and cabinet damage |
Why it matters
Tool chests are often listed with similar photos but different drawer slides, load ratings, and included mounting hardware. Matching model 706105950 first ensures the price you see applies to the exact Craftsman unit you own.
Last updated: February 2026