Craftsman 706310150 tool chest Parts

Craftsman tool boxes are made by manufacturers that produce tool storage for the Craftsman brand; the exact maker can vary by product line and production run. For your Craftsman tool chest model 706310150, the most reliable way to confirm the specific sourcing and service details is to use the identification information and documentation in the owner's manual.

How to identify the maker for model 706310150

The operator’s manual for standard duty tool chests explains where to find the model information needed for service parts: the label is on the interior right side of the topmost drawer.

Use this checklist:

• Pull out the top drawer and look on the interior right side for the ID label
• Write down the full model number (706310150) and any additional codes on the label
• Match that information to the documentation and service parts drawing
• Keep the label info handy when ordering hardware, casters, or drawer slide-related items

What we can confirm from the documentation

The documentation for this Craftsman tool chest focuses on safe use, maintenance, and assembly hardware rather than naming a specific factory.

What you’re checking	Where to look	What it helps with
Model and ID label	Inside right side of topmost drawer	Correct service parts identification
Service parts drawing reference	In the manual	Finding the right service parts list
Assembly hardware sizes	In the manual	Matching bolts, nuts, and screws

Why it matters

Tool chests often share similar designs across multiple production runs, but details like drawer slides, casters, locks, and mounting hardware can differ. Using the model label location and the manual helps ensure you match the correct hardware and maintenance steps to your exact 706310150 configuration.

Helpful care tips that protect the chest (and your tools)

These maintenance and safety steps from the manual help prevent drawer and caster problems:

• Keep the unit on a level surface to reduce tip risk
• Lock drawers before moving the chest
• Push the chest when moving it (do not pull)
• Lubricate casters with high quality bearing grease yearly
• Lubricate drawer slides with grease (or equivalent) twice yearly
• Lubricate the lock with graphite yearly

Last updated: February 2026

Yes. On the Craftsman 706310150 tool chest, we remove drawers by fully extending the drawer, releasing the slide levers on both sides, then pulling the drawer straight out. Removing drawers also makes the chest lighter and gives access for moving or mounting.

How to remove the drawers (lever-release slides)

• Empty the drawer completely.
• Pull the drawer all the way open.
• Locate the release lever on each slide (left and right).
• Lift or lower each release lever (direction depends on the slide).
• While holding both levers released, pull the drawer straight out to remove it.
• Set drawers aside in order so they go back into the same openings.

Reinstalling the drawers (ball-bearing slides)

We reinstall by extending the cabinet slides and the drawer slide carriers, aligning them, then pushing the drawer in slowly until it fully closes and engages.

• Pull the slides and slide carriers to the fully extended position.
• Align the slide on the cabinet with the slide on the drawer.
• Start one side, then the other side.
• Push the drawer in slowly to the fully closed position.
• Open and close the drawer once to confirm smooth operation.

Moving the chest safely with drawers removed

Removing drawers helps reduce weight and prevents slides from getting damaged during transport.

Task	Best practice	Why it matters
Moving the chest	Remove heavier drawers first	Lowers the center of gravity and reduces tip risk
Protecting finish	Use packaging material or blankets	Prevents scratches and paint chips
Keeping drawers aligned	Match drawers to their original slides	Helps maintain smooth operation

Why it matters

Drawer slides are designed to run on matched hardware. Keeping each drawer with its original slide position helps the tool chest open and close smoothly after you move it or service it.

For the exact drawer removal and slide details for this model, follow the steps in the owner's manual.

Last updated: February 2026

If you do not need a full tool chest like the Craftsman 706310150, the best alternatives are storage options that match how you work: portable carry, wall-mounted visibility, or mobile shop storage. Choose based on tool size, how often you move tools, and how much weight you need to store safely.

Common alternatives (and when they work best)

• Tool bag or tool backpack: best for service calls and hand tools you carry daily
• Toolbox or tackle-style organizer: best for small parts, fasteners, and compact tool kits
• Pegboard wall system: best for quick visibility and grabbing tools in a fixed workspace
• Magnetic tool strip or rail: best for frequently used metal tools (drivers, pliers) near a bench
• Rolling tool cart: best for moving tools around a garage or shop without stacking drawers high
• Bucket organizer: best for basic kits and jobsite carry when you want low cost and portability

How to pick the right option

Use these quick decision points:

• If you move tools often, prioritize portable carry (bag, backpack, bucket organizer).
• If you want tools visible and easy to grab, prioritize wall storage (pegboard, magnetic strip).
• If you want mobility but still want trays and compartments, prioritize a rolling cart.
• If you store heavy tools, prioritize rated capacity and stable storage to reduce tip risk.

Capacity and safety considerations (important)

Your Craftsman 706310150 operator guidance includes weight limits that are useful for planning any storage setup. Keep these in mind when choosing an alternative:

Storage need	What to prioritize	Why it matters
Heavy tools	Sturdy frame, stable base	Reduces tipping and drawer/handle damage
Small parts	Dividers, trays, labeled bins	Prevents lost hardware and mixed fasteners
Daily carry	Comfortable handles/straps	Reduces fatigue and dropped tools
Fixed shop setup	Wall anchors, spacing	Keeps tools accessible and organized

Why it matters

The “best” alternative is the one that keeps tools organized without overloading drawers or creating instability. For any drawer-based storage, avoid overfilling and avoid opening multiple drawers at once to help prevent tipping.

For model-specific use, maintenance, and safe loading guidance, use the owner's manual.

Last updated: February 2026

For Craftsman tool chest model 706310150, the operator’s manual focuses on safe loading and assembly, not overall width, height, and depth. To get the exact size of your 3-drawer chest, we recommend confirming the model label and measuring the outside dimensions directly; then use the 706310150 operator's manual for drawer removal and handling guidance.

How to identify and measure the correct unit

“3-drawer” can describe different Craftsman tool storage pieces, so start by matching the exact product you own.

• Locate the model label on the interior right side of the topmost drawer.
• Confirm the model number reads 706310150.
• Measure overall width, height, and depth at the widest points (include handles and trim).
• Measure with drawers fully closed and the lid (if equipped) closed.
• If your chest is mounted on a cabinet or tool center, measure each section separately.

What the manual does confirm (important specs)

The manual provides load and safety limits that matter when you are planning storage and use.

Item	Specification from the manual	Why it matters
Max weight per drawer	30 lb	Prevents slide damage and sticking drawers
Max total weight with 3 x 1 in casters	300 lb	Helps avoid caster failure and tip risk
Max total weight with 4 x 2 in casters	500 lb	Sets safe loading for heavier setups

Why it matters

Accurate outside measurements prevent fit problems in a garage bay, truck, or under a workbench. Following the manual’s drawer and total weight limits also reduces tipping risk, especially if more than one drawer is opened.

Last updated: February 2026

For the Craftsman tool chest model 706310150, the model number is printed on an identification label on the interior right side of the topmost drawer. Open the top drawer and check the inside right wall for the label; the location is shown in the 706310150 owner's manual.

Quick steps to find the model label

• Pull the top drawer all the way open
• Look on the interior right side (inside wall) of that top drawer area
• Use a flashlight; the print is often small
• Wipe dust or grease off the label so the numbers are readable
• Copy the model number exactly as printed (including any extra digits or letters)

If the label is hard to read

• Remove any drawer liner that may cover the label
• Clean gently with mild soap and water on a cloth, then dry
• Take a close-up photo and zoom in to confirm characters

What to write down

Label item	Why it matters
Model number	Matches the correct parts diagrams and service parts
Any extra letters or numbers	Identifies the exact version so parts fit correctly

Why it matters

Using the correct model number prevents ordering the wrong drawer slide, lock parts, casters, or mounting hardware for your Craftsman tool chest.

Last updated: February 2026