Owner’s manual
Who will replace broken Craftsman tools?
Craftsman tool replacement is handled through the Craftsman warranty process, not through your Craftsman 706659750 tool center with riser bin. We recommend using your tool’s warranty paperwork and following the warranty steps for that specific tool; keep your proof of purchase and the tool’s model/part information handy.
What to do to get a broken tool replaced
- Identify the exact tool (type, size, and any model number stamped on it).
- Gather proof of purchase (receipt, order confirmation, or other dated record).
- Check whether the tool is a hand tool, power tool, or accessory; warranty terms can differ.
- Inspect for obvious misuse (cheater bars, altered handles, impact use on non-impact tools), since that can affect coverage.
- Follow the warranty instructions included with the tool or packaging.
Quick checklist before you start a warranty claim
| What to have ready | Why it matters |
|---|---|
| Tool identification (markings/model) | Ensures the correct replacement is issued |
| Proof of purchase | Confirms eligibility and purchase date |
| Photos of the failure (optional) | Helps document what broke |
| Your contact and shipping info | Speeds up processing |
Why it matters
Warranty replacement depends on the specific Craftsman tool and its warranty terms. Keeping the tool details and purchase record organized prevents delays and helps ensure you receive the correct replacement.
For model-specific information about your Craftsman 706659750 tool storage (assembly, hardware, and safe use), use the 706659750 owner's manual.
Last updated: February 2026
Can you remove the drawers from a Craftsman tool box?
Yes. On the Craftsman tool center with riser bin model 706659750, you can remove drawers so the cabinet is lighter and easier to move. The basic method is to fully extend the drawer, release the slide locks (or retaining tabs), then pull the drawer straight out.
How to remove the drawers safely
- Empty the drawer completely (tools add a lot of weight fast).
- Pull the drawer all the way open until it stops.
- Look for release levers or tabs on the drawer slides (usually one per side).
- Press or lift the release(s) while pulling the drawer forward.
- Support the drawer with both hands and keep it level to avoid bending slides.
- Set the drawer aside on a flat surface.
Moving the tool box after drawers are out
Removing drawers lowers the risk of tipping and reduces strain on the slide hardware.
| Task | Best practice | Why it helps |
|---|---|---|
| Move across a garage floor | Keep the cabinet low and push from the frame | Reduces tip-over risk |
| Load into a vehicle | Use a ramp and a helper; lift from the base | Prevents frame twist |
| Reinstall drawers | Align slides, then push in evenly | Avoids slide damage |
Common issues and quick fixes
- Drawer stops halfway: Check for a shipping screw, stop clip, or bent slide section.
- Releases are hard to find: Use a flashlight and look at the inner slide rail near the front.
- Drawer binds on reinstall: Make sure both slide members are fully seated and parallel before pushing in.
Why it matters
Drawer slides are designed for smooth travel, not side-loading. Removing drawers correctly helps protect the slide bearings, keeps the cabinet square, and makes moving your Craftsman tool storage safer.
For model-specific diagrams and any slide-stop details, use the 706659750 owner's manual.
Last updated: February 2026
Where can I buy Craftsman replacement parts?
You can buy replacement parts for your Craftsman tool center with riser bin model 706659750 directly through Sears PartsDirect by searching with your model number and using the parts diagrams to match the exact item you need. For model-specific identification details, use the owner's manual.
Best way to get the right part (especially for older Craftsman models)
- Confirm the full model number (706659750) from the label on the tool storage unit.
- Use the exploded-view diagrams to match the part by location and description.
- Compare any stamped numbers on the old part (if present) to the listing details.
- Order all related hardware you might need (clips, screws, slides) at the same time.
- Keep your drawer layout and riser bin configuration in mind; similar-looking parts can differ by length or hole pattern.
What to check before you order
Most ordering issues come from mismatched configurations (drawer size, riser bin style, or slide type). Use this quick checklist:
| What you’re replacing | What to verify first | Common mismatch |
|---|---|---|
| Drawer slide/runner | Slide length and mounting hole pattern | Left vs. right side slide |
| Drawer handle/pull | Hole spacing (center-to-center) | Similar handle with different spacing |
| Caster/wheel | Stem type and load rating | Stem size or mounting plate pattern |
| Lock/keys | Lock style and cylinder location | Different lock core style |
Why it matters
Tool storage parts are highly fit-specific; a small difference in slide length, handle hole spacing, or caster mount can prevent drawers from closing correctly or make the unit unstable. The owner's manual helps confirm the correct configuration for model 706659750.
Last updated: February 2026
Who's making Craftsman tools now?
Stanley Black & Decker (SBD) owns the Craftsman brand and is the primary company behind today’s Craftsman tool manufacturing. Some older, legacy Craftsman tools (especially those originally sold through Sears) were produced by other manufacturers under licensing and supplier agreements, so the maker can vary by era and product line.
What this means for Craftsman model 706659750 tool storage
Your Craftsman 706659750 tool center with riser bin is supported by model-specific diagrams and documentation that help you identify the correct hardware and replacement components for this storage system. For assembly details and part identification, use the 706659750 owner's manual.
How to tell who made a specific Craftsman tool (quick checks)
- Check the model number and any type/series marking on the tool label.
- Look for a date code or manufacturing code near the rating plate.
- Compare the tool’s design and fasteners to the exploded views in the documentation.
- For power tools, check the rating label for electrical specs and certification marks.
- Match the tool to the correct era (older Sears-era vs. newer SBD-era lines).
Common “then vs. now” overview
| What you have | Typical era | Who commonly made it | What to do next |
|---|---|---|---|
| Sears-era Craftsman tools | Pre-2017 | Multiple suppliers under Sears | Use model/date codes to narrow it down |
| Current Craftsman-branded tools | 2017 to present | Stanley Black & Decker (primary) | Use the tool’s model/series for parts and manuals |
| Craftsman storage (like 706659750) | Varies | Craftsman-branded product line | Use the model manual for hardware and assembly |
Why it matters
Knowing the current brand owner (SBD) helps set expectations for parts sourcing, manuals, and compatibility. For tool storage like the 706659750, the most reliable path is using the model documentation to match hardware, drawer slides, casters, and fasteners correctly.
Last updated: February 2026