Jet Power sander Parts — Browse All Models

Charging the battery for your Jet power sander

• Plug the battery charger outlet cord into the wall outlet before inserting the battery onto the charger.
• Slide the battery onto the charger. Make sure that the battery is fully seated on the charger.
• The red LED light will blink constantly to indicated that the battery is fully seated and the battery charging process has begun.
• The battery is completely charged when the red LED lights remains on constantly.
• The battery can be left in the charger without harming the battery.
• To remove the battery, press the battery release button and slide the battery off the charger.

How to install a sanding disc on your Jet power sander

• Be sure that the power sander is unplugged and that it's cool to the touch.
• Push the hub of the disc nut through the center of the sanding disc.
• Position the backing disc behind the sanding disc and push the disc nut through the backing disc.
• Push the assembled discs on the spindle and thread the disc nut onto the disc nut hub.
• Tighten the disc nut completely down on the spindle.
• Engage the locking pin to lock the spindle in place.