Duracraft Air purifier Parts — Browse All Models

Replacing filters in your Duracraft air purifier

• Turn off the air purifier and unplug the power cord from the electrical outlet.
• Carefully lay the air purifier down on a padded flat surface with the front grille facing up.
• Remove the front grille. Pull off the pre-filter and discard it. Pull out the HEPA filter and discard it.
• Remove packing from the new HEPA filter and pre-filter. Insert the new HEPA filter into the air purifier. Install the prefilter.
• Reinstall the front grille and set the air purifier upright. Restore electrical power to the air purifier and turn it on.

Cleaning your Duracraft air purifier

• Turn off the air purifier and unplug the power cord from the electrical outlet to completely disconnect electrical power.
• Remove the front grille and clean all slots in the grill to remove dust, dirt and debris. Reinstall the front grill on the air purifier.
• Clean the outside of the air purifier cabinet using a soft cloth moistened with plain water. To remove stubborn stains, use a soft cloth moistened with mild detergent such as dish detergent. Wipe the area with a soft cloth moistened with plain water to remove detergent residue. Dry all surfaces with a soft cloth.
• Don't attempt to clean the pre-filter or HEPA filter. Those filters aren't washable and attempting to wash the filter will cause damage.
• Plug the air purifier power cord back into the electrical outlet to restore power and turn on the air purifier.