Memorex Office Parts — Browse All Models

Steps for setting up your Memorex printer

• Unpack the printer and remove all tape from covers and trays. Read the owner's manual instructions for setting up the printer.
• Connect the printer power cord and plug it into a working wall outlet.
• Turn on the printer and allow the printer to initialize.
• Connected the printer cable or USB cable to your computer.
• Select the "Add a printer" option on your computer and follow the instructions for the computer to set up printer communications.
• Print a test page to make sure the printer works properly.

Safely installing Memorex office equipment

Before installing office equipment, read the owner's manual and follow all safety precautions outlined in the manual. Gather tools need for unpacking, assembly and installation.

Carefully unpack the equipment. Use caution when cutting cardboard boxes using box cutters. Wears gloves to protect your hands when installing office equipment.

Follow assembly instructions carefully to make sure office equipment is safely and properly assembled. Tighten all fasteners firmly. Install all safety devices and labels.

Position the office equipment in an area away from extreme heat sources and sources of liquids such as water coolers and coffee makers. Leave proper clearance on all sides of the equipment to ensure proper air flow through control and operation components.

Use a surge protector to prevent equipment damage from power surges that can occur in electrical lines during storms.