Milwaukee Power sander Parts — Browse All Models

Electrical safety precautions to follow when using your Milwaukee power sander

• The power sander power cord plug must match the receptacle on the electrical wall outlet. Never modify the power sander power cord plug in any manner. Don't use an adapter plug with an earth grounded power sander.
• Don't expose the power sander to rain or wet conditions. Water entering the power sander will increase the risk of electric shock.
• Check the condition of the power cord before using the power sander. Repair damaged wires in the power cord or replace the power cord if it's damaged before using the power sander.
• When operating the power sander outdoors, use an extension cord rated for outdoor use to prevent the chance of electrical shock.
• If operating the power sander in a damp location or around a water source, use a GCFI protected power supply.

Safety tips for your Milwaukee power sander

• Sanding surfaces covered in lead based paint is not recommended because it's difficult to safely control contaminated dust.
• Keep others away from the work area when sanding and grinding work pieces.
• Wear eye protection and use a dust mask or respirator when sanding and grinding work pieces. Replace the filter on the respirator regularly.
• Wear work gloves to protect your hands when using the power sander.
• Minimize the amount of dust generated when sanding painted surfaces. Use the dust bag to catch dust whenever possible.
• Seal areas being sanded with plastic sheeting to minimize others exposure to dust.