$19.56 |
9% OFF Phone Price : $21.56
CONFIRM THE PART FITS
Part Information
This tine shaft oil seal (part number 721-04232) is for tillers.
Tine shaft oil seal 721-04232 presses into the side of the transmission housing to prevent transmission oil from leaking past the tine shaft.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $21.16 |19% OFF Phone Price : $26.16
- $74.45 |17% OFF MSRP : $90.00
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #7122765 Ace rear-tine tiller | 7122765 | Transmission |
| Model #7103203 Ace rear-tine tiller | 7103203 | Transmission |
| Model #21C-64M1066 Troybilt rear-tine tiller | 21C-64M1066 | Transmission |
| Model #21C-65M1066 Troybilt rear-tine tiller | 21C-65M1066 | Transmission |
| Model #40M MTD rear-tine tiller | 40M | Transmission |
| Model #21AA404D299 MTD rear-tine tiller | 21AA404D299 | Transmission |
| Model #21AB40M7799 MTD rear-tine tiller | 21AB40M7799 | Transmission |
| Model #24729930 Craftsman rear-tine tiller | 24729930 | Transmission |
| Model #21AB40M1099 MTD rear-tine tiller | 21AB40M1099 | Transmission |
| Model #21D-64M1066 Troybilt rear-tine tiller | 21D-64M1066 | Transmission |
Reviews
Oil bearing seal and foam grip install
Quality parts that fit the equipment correctly. The foam grip required using water and soap mixture to slip on. Replaced both oil bearing seals on rear tiller. Required drilling small hole and using a flat screw driver and pliers to pry out old seal. Cleaned shaft with emery cloth, and greased before putting on new oil seal. Used hammer and round pipe to tap in new oil seal flush to casing/
James J, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour