$6.23
CONFIRM THE PART FITS
Part Information
This friction wheel assembly (part number 918-07239) is for snowblowers.
Friction wheel assembly 918-07239 meshes with the friction disc, causing the drive wheel axle to turn. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $106.37 |9% OFF Phone Price : $116.37
- $77.40 |17% OFF MSRP : $93.00
- $28.26 |15% OFF Phone Price : $33.26
- $37.21 |12% OFF Phone Price : $42.21
- $8.69 |21% OFF MSRP : $11.00
- $91.14 |17% OFF MSRP : $110.00
- $2.56 |28% OFF Phone Price : $3.56
- $23.64
- $3.00 |25% OFF Phone Price : $4.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247888450 Craftsman gas snowblower | 247888450 | Wheels/transmission frame |
| Model #31BH95SI799 MTD gas snowblower | 31BH95SI799 | Drive |
| Model #31AE9P3I801 Yard-Man gas snowblower | 31AE9P3I801 | Drive/wheels |
| Model #247883971 Craftsman gas snowblower | 247883971 | Drive |
| Model #24788045 Craftsman gas snowblower | 24788045 | Wheels/drive shaft |
| Model #247883970 Craftsman gas snowblower | 247883970 | Gears/wheel/engine |
| Model #247888460 Craftsman gas snowblower | 247888460 | Wheels/steering shaft |
| Model #247888780 Craftsman gas snowblower | 247888780 | Wheels/engine/pulleys |
| Model #31CH97SJ799 MTD gas snowblower | 31CH97SJ799 | Wheels/engine/pulleys |
| Model #31AH95SI799 MTD gas snowblower | 31AH95SI799 | Engine/transmission |
Reviews
Twenty minutes snowblower gear assembly
Fairly easy to replace gears, upper, lower and angle chutes
Samcan, Glenburn Maine
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Exact Fit, and some service advice to DIYers.
Parts that I ordered were the exact parts needed for my very large Craftsman snowblower. IMPORTANT NOTE IF REPLACING DRIVE PLATE: I replaced the Drive Plate Assembly. The threads are REVERSE THREADS! So to remove the plate it must be turned clockwise, not counter-clockwise as would be normal. I attached pictures of my damaged parts. They became damaged because the friction drive support bracket lost one of the retaining clips that hold it in place. This caused the plate to be at an angle, ripping the friction wheel rubber off and digging deep gouges in drive plate. Word to the wise: when the drive starts to malfunction stop as quickly as possible and investigate. Replacing a simple c-clip would have saved me a few hundred dollars and a bunch of time to repair!
jimmysixx, New York
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour