Dishwasher Pump and Motor Assembly (replaces W10482482) WPW10482482

Buying a pump to replace a $.25 O ring!

I had to pay someone to come and install the pump. It's a crime that to replace a simple o ring, the entire pump assembly had to be purchased.

A little different

The part had an extra 'port' which required my husband research it a bit to ensure it wouldn't leak. Otherwise, eeasy-peesey

Easy to install!

It was easy to install. I worked maybe 30 minut. Great service!

Pump replacement

Pretty easy install, fixed the problem and the machine is like new again!

Moderately easy to install

Need some good basic mechanical skills to perform this repair.

Two people best

The part fixed my dishwasher that wouldn't cycle. It would fill and then drain and you could hear the motor trying to engage but couldn't start. Take careful notes of where the various wires connect. Also know your going to need the sensor from the sump and the impeller from the old unit. The unit installs from inside the dishware down, there's a little plastic post and notch alignment guide. The unit can be hard to seal up, make sure someone keeps unit in alignment and use your palm or maybe a rubber mallet to seat the gasket. Tight the toggle in sequence several times.