CONFIRM THE PART FITS
Part Information
This door handle (part number MEB38925704) is for microwaves.
The door handle doesn't include new screws.
A service technician should install this door part because the door contains shielding components. The technician must correctly test the microwave for leaks in the microwave shield before you can safely use the microwave.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #72180033700 Kenmore microwave/hood combo | 72180033700 | Door |
Model #72180043700 Kenmore microwave/hood combo | 72180043700 | Door |
Reviews
Like many parts
A small bit of plastic had to be shaved off to fit correctly and easily. No instructions for the average person To do the repair. I wouldn't tecommend it to most people
Thebabe247, Pennsylvania
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Project Possible
It was fairly easy to install. I found a video on the Internet that helped me.
Donna41, Arizona
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Sort of easy to install
Easy except it did take reading the instructs several times and chasing the dropped lost screw!
Dana T, Houston
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Fits well, not too hard to install.
We started by prying off the panel on the inside of the door at the bottom right corner. Then it was a matter of locating screws. We got some cracking of the plastic after the repair. We think it was due to overtightening the top screw.
JillOTrades, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour