MTD Snowblower Thrust Bearing 741-0184

Basic information

• Part name: Snowblower thrust bearing
• Manufacturer: MTD
• Category: Snowblower bearings
• Primary function: Handles axial loads while allowing rotating components to move smoothly under pressure

Technical specifications

• Inside diameter: 0.88 inch
• Outside diameter: 1.44 inches
• Thickness: 0.078 inch

Installation & compatibility

• Compatible models: Fits select MTD, Craftsman, Troy-Bilt, and Yard-Man snowblowers; confirm compatibility using your models parts diagrams
• Installation difficulty: Medium; requires accessing internal components and positioning the bearing correctly
• Tools required: Socket set, wrench

Additional information

This snowblower thrust bearing, part number 741-0184, supports rotating shafts or assemblies that experience side-to-side force during operation. It helps maintain proper spacing and smooth movement between components that carry axial load, reducing drag and wear as the snowblower runs.

If the thrust bearing wears out or fails, you may notice increased friction, grinding noises, or resistance when components rotate under load. Operation can feel rough, and internal parts may bind or shift out of alignment during use.

Disconnect the spark plug wire before starting the repair to prevent accidental startup. Bearing surfaces and nearby components can have sharp edges, so wearing work gloves can help protect your hands during handling. Install the bearing in the correct orientation and make sure it sits flat and fully seated before reassembling the unit.