KitchenAid KFP0710CU0 food processor Parts

Some KitchenAid food processor parts are interchangeable, but we match parts by exact model because fit and safety interlocks can vary. For KitchenAid model KFP0710CU0, use the model-specific parts list to confirm the correct bowl, lid, blade, and disc components before ordering.

What is usually interchangeable (and what is not)

Parts interchange most often when the bowl size, lid-lock design, and drive/shaft style are the same. Even small design changes can prevent the unit from locking or running.

• Sometimes interchangeable: slicing/shredding discs, disc adapters, pushers (when chute size matches)
• Often not interchangeable: bowls and bowl lids (lock tabs and safety switches differ)
• Rarely interchangeable: blades and dough blades (hub height and drive shape differ)
• Never assume: “7-cup” or similar capacity alone guarantees compatibility

KFP0710CU0 parts we recommend matching by model

These are common “fit-critical” items for this KitchenAid food processor; confirm you are replacing like-for-like:

• Food processor bowl lid W11551396
• Bowl W11319163
• Food processor multi-purpose blade W11239491
• Disc, slicing W11319164
• Disc, reversible W11319167

Quick compatibility checklist

Use this checklist before you buy a replacement part for KFP0710CU0:

• Confirm the full model number on the rating label: KFP0710CU0
• Compare the lock style (lid tabs and bowl handle orientation)
• Match the drive interface (disc shaft adapter and blade hub shape)
• Verify chute size if replacing the pusher or lid
• Replace worn parts that affect locking, not just cutting performance

Common swaps: what to expect

Part type	Interchange likelihood	What can block compatibility
Bowl	Low	Handle shape, lock tabs, safety switch alignment
Bowl lid	Low	Latch geometry, feed tube size
Slicing/shredding disc	Medium	Center hub style, required adapter
Blade (multi-purpose/dough)	Low to medium	Hub height, drive shape

Why it matters

Food processors use safety interlocks so the motor only runs when the bowl and lid are seated correctly. A “close enough” bowl or lid can stop the machine from starting, leak during use, or wear the drive parts faster.

Last updated: February 2026

Yes. KitchenAid sells replacement parts for the KitchenAid KFP0710CU0 food processor, and we also carry model-matched parts so you can replace common wear items like the bowl, lid, blades, and slicing discs and keep your food processor working safely and smoothly.

Common KFP0710CU0 replacement parts we see customers order

These are the parts most often replaced due to normal wear, cracking, or loss:

• Food processor bowl lid W11551396 (lid not locking or cracked)
• Bowl W11319163 (bowl cracked, cloudy, or leaking at the base)
• Food processor multi-purpose blade W11239491 (dull blade or damaged hub)
• Disc, slicing W11319164 (bent disc or poor slicing results)
• Blade, dough W11319166 (dough blade worn or missing)

How to make sure you buy the right part

Because KitchenAid makes similar-looking bowls and lids across multiple series, matching by model number matters.

• Confirm the model number is KFP0710CU0 on the rating label
• Match the part by part ID (for example, W11551396), not just the description
• Compare your original part shape: tabs, feed tube style, and locking features
• Replace safety-related items (bowl, lid, pusher) if they are cracked or warped
• If the unit will not start, check that the bowl and lid are fully seated before ordering parts

Quick compatibility guide (what each part does)

Part	What it affects	Replace when
Bowl lid	Interlock and feeding	Cracked, warped, will not latch
Bowl	Fit, sealing, stability	Cracked, loose fit, leaks
Multi-purpose blade	Chopping and mixing	Dull, chipped, wobbling
Slicing disc	Slicing thickness/quality	Bent, dull, uneven cuts

Why it matters

Food processors rely on a bowl-and-lid interlock for safe operation. Using the correct KitchenAid KFP0710CU0 replacement parts helps the lid lock properly, prevents leaks, and keeps blades aligned so performance stays consistent.

Last updated: February 2026

A 7-qt KitchenAid bowl-lift stand mixer is typically rated at about 500 watts. This watt rating applies to the stand mixer product line, not to the KitchenAid food processor model KFP0710CU0, so we use the common 7-qt mixer spec when answering this question.

What to check to confirm the exact watt rating

• Look for the watt rating on the mixer’s rating label (often on the base or underside)
• Confirm the exact model number (for example, KSM70-series 7-qt bowl-lift mixers)
• Compare the watt rating to the mixer’s amperage (watts = volts × amps)
• Make sure you are not mixing up a food processor rating with a stand mixer rating
• If you are shopping parts, match parts to the correct appliance model first

Mixer vs. food processor: why the numbers differ

Food processors and stand mixers are built for different loads (slicing/chopping vs. kneading/mixing), so their motor ratings and how they deliver torque can be very different.

Appliance type	Typical power range	What it’s designed for
7-qt bowl-lift stand mixer	~500 W	Dough kneading, heavy mixing
Countertop food processor	~300 to 800 W	Chopping, slicing, shredding

If you meant a KitchenAid food processor instead

If you are working on the KitchenAid KFP0710CU0 food processor, we focus on fit and function parts (bowl, lid, blades, discs) rather than watt rating. Common replacements for performance issues include the food processor multi-purpose blade W11239491 and the food processor bowl lid W11551396.

Why it matters

Wattage helps you compare motor capacity, but for real-world performance, the correct attachments (blade, dough blade, slicing disc) and proper assembly often matter more than the number on the label.

Last updated: February 2026

Most food processors, including the KitchenAid KFP0710CU0, typically last 7 to 10 years with normal home use. With light use and good care (proper cleaning, not overloading, and using sharp accessories), it’s common for a unit to run 10+ years before performance drops.

What affects lifespan the most

• How often you use it (daily prep wears the motor and drive faster than occasional use)
• Load and food type (stiff doughs and hard foods create higher torque and heat)
• Accessory condition (dull blades make the motor work harder)
• Bowl and lid fit (worn or cracked plastic can prevent safe locking and strain the drive)
• Cleaning habits (food residue in couplers and seals accelerates wear)

Signs your food processor is nearing end of life

• Motor slows down or bogs down on normal slicing/chopping
• Burning smell or excessive heat after short run times
• Intermittent power (starts and stops, or only runs when pressed a certain way)
• Bowl or lid won’t lock consistently
• Excessive vibration, rattling, or leaking

Maintenance that extends life (and protects the motor)

• Keep blades sharp; replace worn accessories like the food processor multi-purpose blade W11239491.
• Avoid running long continuous cycles; use short pulses and let the motor cool.
• Don’t force heavy dough beyond what the machine can handle; use the correct accessory such as the blade, dough W11319166 when needed.
• Hand-wash and fully dry parts that trap residue; keep the drive area clean.
• Stop immediately if you hear grinding; check for mis-seated bowl, lid, or adapter.

Typical lifespan by usage level

Usage pattern	Typical life expectancy	What usually fails first
Light (1 to 2 times/week)	10 to 15 years	Bowl/lid wear, blade dulling
Moderate (3 to 5 times/week)	7 to 10 years	Drive components, switches
Heavy (daily, dough-heavy)	3 to 7 years	Motor wear/overheating

Why it matters

A food processor often “fails early” because accessories get dull or the bowl/lid fit degrades, which makes the motor work harder. Replacing a worn blade or dough blade can restore performance and reduce strain on the KFP0710CU0 drive system.

Last updated: February 2026

For the KitchenAid 7-cup food processor on this parts page, the model number is KFP0710CU0. If you are matching parts like a bowl, lid, or blade, using the exact model number ensures the replacement fits and the safety interlocks line up correctly.

How to confirm you have the right model

We recommend verifying the model number on the appliance rating label before ordering parts.

• Look on the bottom of the base (underside) for the model/serial label
• Match every character, including any trailing digits (for example, KFP0710CU0)
• If your label shows a different KFP number (such as KFP0718), use that model when selecting parts
• If the label is worn, compare your bowl and lid style to the parts shown for your model

Helpful reference: how to find your appliance model number (and what it means for parts)

Common 7-cup model numbers (quick comparison)

KitchenAid has multiple 7-cup food processor versions. Here is a simple way to think about it:

What you are doing	Use this model number
Ordering parts from this page	KFP0710CU0
Ordering parts for a different 7-cup version	Use the model number on your label

Why it matters for parts fit

Food processors rely on bowl and lid alignment for proper locking and operation. Even small model differences can change:

• Bowl tabs and handle shape
• Lid latch geometry
• Feed tube and pusher fit
• Blade hub and disc shaft interface

If you need common replacement items for KFP0710CU0, these model-matched parts are good starting points:

• Food processor bowl lid W11551396
• Bowl W11319163
• Food processor multi-purpose blade W11239491

Last updated: February 2026