Formula Ventures Office Parts — Browse All Models

Steps for setting up your Formula Ventures printer

• Unpack the printer and remove all tape from covers and trays. Read the owner's manual instructions for setting up the printer.
• Connect the printer power cord and plug it into a working wall outlet.
• Turn on the printer and allow the printer to initialize.
• Connected the printer cable or USB cable to your computer.
• Select the "Add a printer" option on your computer and follow the instructions for the computer to set up printer communications.
• Print a test page to make sure the printer works properly.

Replacing the projector bulb in your Formula Ventures office equipment

• Unplug the power cord and let the lamp cool down completely before replacing it.
• Locate the lamp access panel and remove the access panel mounting screws. Remove the lamp access panel.
• Carefully reach in and pull the lamp out of the projector.
• Wear gloves to prevent finger prints and oils from depositing on the new bulb. Unpack the new bulb and carefully install it in the projector.
• Reinstall the lamp access panel and secure the panel with the mounting screws.
• Plug the equipment power cord back in.