Conair Office Parts — Browse All Models

Safely installing Conair office equipment

Before installing Conair office equipment, read the owner's manual and follow all safety precautions outlined in the manual. Gather tools need for unpacking, assembly and installation.

Carefully unpack the equipment. Use caution when cutting cardboard boxes using box cutters. Wears gloves to protect your hands when installing office equipment.

Follow assembly instructions carefully to make sure office equipment is safely and properly assembled. Tighten all fasteners firmly. Install all safety devices and labels.

Position the office equipment in an area away from extreme heat sources and sources of liquids such as water coolers and coffee makers. Leave proper clearance on all sides of the equipment to ensure proper air flow through control and operation components.

Use a surge protector to prevent equipment damage from power surges that can occur in electrical lines during storms.

Replacing the projector bulb in your Conair office equipment

• Unplug the power cord and let the lamp cool down completely before replacing it.
• Locate the lamp access panel and remove the access panel mounting screws. Remove the lamp access panel.
• Carefully reach in and pull the lamp out of the projector.
• Wear gloves to prevent finger prints and oils from depositing on the new bulb. Unpack the new bulb and carefully install it in the projector.
• Reinstall the lamp access panel and secure the panel with the mounting screws.
• Plug the equipment power cord back in.