McCulloch Chipper/shredder Parts — Browse All Models

Shredding tips for your McCulloch chipper/shredder

• Don't overload the shredder by dumping large amounts of material into the hopper opening all at once.
• Alternate loads of wet and dry material to prevent the discharge path from becoming plugged.
• Never use any object to force material into the shredding chamber. It could get caught in the shredding hammers and damage the unit.
• Follow all operating and safety guidelines in the owner's manual for your chipper/shredder.

How to start the engine on your McCulloch chipper/shredder

• Check the engine oil for proper level. Add oil if needed. Make sure the fuel tank is full of gas.
• Set the throttle to FULL and close the choke. NOTE: A warm engine may not require choking.
• Place one foot on the front support leg to hold the unit firmly in place.
• Pull the starter rope out to begin turning the engine over. Pull slowly at first and increase speed with each successive pull.
• After the engine starts, open the choke and move the engine throttle control to SLOW. Warm up the engine by running it for at least a minute.
• Set the throttle to FULL and begin chipping/shredding.