Official General Slicing space heater parts

How to replace the temperature control thermostat on a General Slicing space heater

• Unplug the heater power cord or shut off the house circuit breaker for the heater to disconnect electrical power. Wear work gloves to protect your hands during the repair.
• Remove the temperature control knob from the temperature control thermostat stem.
• Remove the front grille cover from the heater.
• Remove the temperature control thermostat mounting screws and pull the thermostat out slightly.
• Disconnect the wires from the temperature control thermostat and pull the thermostat out.
• Connect the wires to the new thermostat and mount the new thermostat in the heater.
• Reassemble the space heater and restore electrical power by plugging in the power cord or resetting the house circuit breaker.

Replacing the fan motor in a General Slicing space heater

• Unplug the space heater to disconnect electrical power. Wear work gloves to protect your hands during the repair.
• Remove the fan cover mounting screws and pull the fan cover off.
• Disconnect the fan motor wiring harness.
• Remove the fan mounting screws and pull the fan out. Remove the fan blade from the motor shaft.
• Install the fan blade on the new fan motor and mount the fan in the fan housing. Connect the fan wire harness to the fan motor.
• Reinstall the fan cover and plug the fan power cord back into the electrical outlet to restore power to the fan.