$63.19 |
7% OFF Phone Price : $68.19
CONFIRM THE PART FITS
Garage Door Opener Limit Switch (replaces 41D3452) 041D3452
Part #041D3452
This part fits
Part Information
This limit switch (part number 041D3452) is for garage door openers.
Limit switch 041D3452 stops the garage door opener motor when the door is fully opened or closed.
Follow the instructions in your owner's manual or installation guide when installing this part.
Frequently Used Together
- $33.89 |13% OFF Phone Price : $38.89
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #13953672SRT3 Craftsman garage door opener | 13953672SRT3 | Opener assembly |
| Model #13953677SRT3 Craftsman garage door opener | 13953677SRT3 | Opener assembly |
| Model #13953824SRT1 Craftsman garage door opener | 13953824SRT1 | Opener assembly |
| Model #13953674SRT2 Craftsman garage door opener | 13953674SRT2 | Opener assembly |
| Model #139536141SR Craftsman garage door opener | 139536141SR | Opener assembly |
| Model #13918869 Craftsman garage door opener | 13918869 | Opener assembly |
| Model #13953670SRT1 Craftsman garage door opener | 13953670SRT1 | Opener assembly |
| Model #139536481DM Craftsman garage door opener | 139536481DM | Motor unit assembly parts |
| Model #13953914 Craftsman garage door opener | 13953914 | Motor unit assembly |
| Model #13953672SRT1 Craftsman garage door opener | 13953672SRT1 | Opener assembly |
Reviews
Piece of Cake
All you have to do is remove the cover (a few screws), pop the old limit switch out, replace the wires, and pop the new one in. Almost anyone can do it. Total time was around 30 min.
sbrady64034, Kansas City, MO
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Ok
If you get the limit switch Assembly, get the drive gear also. If you don't, you risk it continuing to skip. Only trick is to get the drive gear off.
WMDIY, West Michigan
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Installing this limit switch
It was easy to install this part, the instructions were very accurate and it only took 30 minutes.
awbart1974, Owensboro, KY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Only took about 20 minutes. I was happily surprised. Came with instructioins.
RickyP, Louisville, KY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Onw Small Part - One Working Garage Door!
When this Limit Switch was delivered, it only took about 20 minutes to install and test it. My car had been sitting outside, collecting ugly yellow pollen for 2 weeks! I was never so happy to hose a car off and drive it into the garage! Thank You!
Relieved O L, Florida
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Garage Door Opener Limit Switch Installation
Replaced malfunctioning limit switch with no difficulties. Just keep track of the wiring arrangement during removal and installation.
Snake, Kingston, TN
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy Installation
15 minutes to install with no tools needed except a screwdiver to remove cover
RHEND1955, PA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Very easy to install.
Very easy to install and shouldn't take more than 5 to 10 minutes. No tools required other than a socket driver to remove the garage door cover. Disconnect power. There are three tabs holding it in place. Squeeze to release and pull down and out. Make note of wire connector locations before disconnecting wires. Install in reverse order, aligning gears into place as you do so. Troubleshooting that this is the culprit might take a little longer. My problem was that after 17 years of usage, the plastic gear had worn just enough to cause it to start slipping, causing it to go out of adjustment.
GManDIY, Salt Lake City, Utah
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes