CONFIRM THE PART FITS
Garage Door Opener Gear and Sprocket Assembly 41C4220A
Part #41C4220A
Part Information
Gear and sprocket assembly 41C4220A is an original equipment manufacturer (OEM) part that fits most Craftsman 139-series chain-drive garage door openers manufactured after 1993. Assembly also fits Chamberlain chain-drive garage door opener models 1240R, 1245R, 1246R, 1255R and 1256R.
Gear and sprocket assembly 41C4220A drives the chain that raises and lowers the garage door.
This gear and sprocket assembly includes the spring washer, thrust washer, retaining ring, bearing plate, 2 roll pins, drive gear, worm gear, helical gear with retainer and grease.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #13953425SRT Craftsman garage door opener | 13953425SRT | Opener assembly |
Model #139536251SR Craftsman garage door opener | 139536251SR | |
Model #13953646SRT2 Craftsman garage door opener | 13953646SRT2 | Opener assembly |
Model #139536181SR Craftsman garage door opener | 139536181SR | |
Model #13953638SRT Craftsman garage door opener | 13953638SRT | |
Model #13953960SRT Craftsman garage door opener | 13953960SRT | Opener assembly |
Model #13953636SRT Craftsman garage door opener | 13953636SRT | Opener assembly |
Model #13953612 Craftsman garage door opener | 13953612 | |
Model #13953200 Craftsman garage door opener | 13953200 | |
Model #13953325SRT1 Craftsman garage door opener | 13953325SRT1 | Opener assembly |
Reviews
Great!
Did exactly what it was supposed to. .............
X4vi0r, FL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Repair gear set for garage door opener.
Wasn't that hard to install and a whole lot less money than buying a new complete unit.
Bob Y, Albuquerque, NM
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Got it to work
The good news is that is worked, the bad, I had to modify and go without some replacement pieces. It took a while but not surprising as the amount of small pieces I had to get to. The online video was instrumental in getting through the whole process. There was a missing spacer or something that wasn't included in the new package and the piece didn't all look like the original. The mounting bracket as you can see in the picture (round metal piece that sits on top of the garage door) should have a flat edge to fit inside the housing. Seeing as the solid steel construction of the housing and the bracket could not be bent, I had to saw/file off a chunk of metal to get it to fit inside the housing. Too much work! Also the bearing that the central shaft is on was a little too stiff/tight. I decided to remove the replacement and put back in the original which was slightly looser. I didn't want that bearing to be so stiff it would make all the plastic gears I replaced strip immediately! Seriously the bearing was so tight I had to use a hammer to get the shaft in the first time! I got through it all and have it working properly, too much work for Chinese "OEM" parts.
fudgey, Denver
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Replacing opener gear sprocket assembly
The most time consuming was removing the power unit from the track
Robert W, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Garage door opener gear and sprocket assembly
Some what difficult to install. Thanks for the directions.
Andrew59, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
MR
I thought that putting the parts together and installing it where not very hard. However, when I finished and pushed the start button, my garage door opener did not react like it had for all those years. I don't know if I did something wrong or what. I attempted to try several things to try to get in working properly. I tried for a goo two to three day's. I had to call Sears and ask for a person to come to my home to hopefully get my opener to work properly.
DAN V, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
garage opener replacement part.
The replacement parts worked exactly as expected. I would suggest using the youtube video repair instructions in addition to the paper.
Brian O, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
I would buy again
Parts arrived on time. Instructions were easy to understand. Gear and sprocket unit was easy to install and setting limit switches was good with the detailed instructions.
Geter D, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend