CONFIRM THE PART FITS

Home ย >ย  Panel

Panel 722067A

โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
5โ˜…
8
4โ˜…
2
3โ˜…
1
2โ˜…
0
1โ˜…
0
BEST SELLER

Part #722067A

Replaced by #1501055E701MA
?
Manufacturer substitution
This part replaces 722067A. Substitute parts can look different from the original.
Online Only Price
$47.89ย |ย 
9% OFFย 
Phone Price: $52.89
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This bottom guard panel (part number 1501055E701MA) is for snowblowers.

Bottom guard panel 1501055E701MA fits under the snowblower to cover and protect the drive chains, friction disc and friction wheel.

Wear work gloves to protect your hands when installing this part.

Reviews

1-8 of 11 reviews
Patricia
Mahanoy City, PAReviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 2 years ago
Patriciaโ€ข 2 years ago
Easy to install. Fits exactly as it should.

Easy to install took about 20 minutes. All holes lined up perfectly.

Boli
Easton PAReviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 2 years ago
Boliโ€ข 2 years ago
Easy to Install

Easy to install and perfect match for my equipment

Reviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 2 years ago
โ€ข 2 years ago
For perfect

It was relatively easy to install. The only issue was the current screws were rusted and need a shot of liquid wrench.

paulbert
North Liberty, IAReviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 4 years ago
paulbertโ€ข 4 years ago
snowblower bottom cover

this bottom cover for my older snowblower fit like a charm. I was amazed the piece was still offered. price wasn't too bad either.

Response from Sears PartsDirect:
SHS Social Care โ€ข 3 years ago

Hi Paul, thank you for sharing your feedback with us. We are glad to hear that the bottom guard panel fit perfectly and for just the right price. Thank you.

Slimey
NEReviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 4 years ago
Slimeyโ€ข 4 years ago
Takes little time to instal

Part was easy to install and took less then 20 minutes. Removed the old plate and installed the new.

Berr40
Western MAReviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 5 years ago
Berr40โ€ข 5 years ago
Very simple with one little hint!

Once blower is up on it's nose,remove all four of the bolts (easily available for about 50ยข each at your hardware store) and feed the three tabs on the panel into the slots - insert the bolts. Holding the panel it's proper place feed the other two bolts. Into appropriate holes. Tighten bolts, you're done.

stillabel12
Smithfield, Rhode IslandReviews 2Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 5 years ago
stillabel12โ€ข 5 years ago
It was an mproved item of the bottom guard.

Only four bolts had to be loosened. The new part had drain holes.

SeniorSander
Northern MichiganReviews 1Votes 0
โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…โ˜…
โ€ข 5 years ago
SeniorSanderโ€ข 5 years ago
Prompt shipping, exact fit

Arrived when promised, fit perfectly. Very satisfied with this purchase.

1-8 of 11 reviews