Range Surface Element, Right Front WB30T10126

It was very easy to replace supposed to open two screws remove all install new

Was so easy to install. Just a few screws and you pull the wires. Replace Element, reverse steps and you are done.

I unscrewed the two screws that hold the glass top down. It swings right up and I used the burner box as a prop to hold it up. I took a photo of the wires before removing them to be sure I got it back together corectly.

It was easy to install with the small exception of trying to get the retainer clips installed.

Although I could look it up on YouTube, it's pretty annoying that there was absolutely zero instructions included. I ended up having to drill holes in the bottom of the burner in order to install it. Other than that, you really need to be a handyman, like myself, in order to install this properly. Also, make sure you unplug the range or shut of the circuit break before you do this.

replaced a glass top electric filament ring. Looked at some You Tube videos to help it good faster. The $200 price for the heating element was high and I'd look for better pricing

These were very easy to install. Biggest issue was trying to figure out how to open the top of the stove. There are 2 screws underneath which when removed, the top pulls up. When you unplug them, just remember where the wires get put back in. The clips can be a little tricky taking off, but if you use a needle nose and pull out and up they pop off. I usually order from here because I never have an issue and usually comes pretty quick.

Can’t actually review this item since it wasn’t the right part. Triple checked Sears website to make sure it was correct. Every time I entered my model number the website stated it was the correct part for my cooktop. It cost me $10 to ship it to me and $6 to ship it back! Waste of $16! Thanks Sears!