CONFIRM THE PART FITS
Part Information
This motor brush (part number 603754-01) is for drills.
Motor brush 603754-01 transfers electric current to the spinning armature in the motor.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #DC212KL TYPE 2 DeWalt hammer drill | DC212KL TYPE 2 | Drill assy |
Model #DC983KATY1 DeWalt drill/driver | DC983KATY1 | Drill assy |
Model #DC985KA TYPE 1 DeWalt drill/driver | DC985KA TYPE 1 | Drill assy |
Model #DC989VATY1 DeWalt drill/driver | DC989VATY1 | Drill |
Model #DC330K TYPE 10 DeWalt reciprocating saw | DC330K TYPE 10 | Sabre saw |
Model #DC212KL TYPE 1 DeWalt hammer drill | DC212KL TYPE 1 | Motor assy |
Model #DW980K-2 DeWalt power drill | DW980K-2 | Drill |
Model #DC980KATY1 DeWalt drill/driver | DC980KATY1 | Drill assy |
Model #DW987K-2TY1 DeWalt drill/driver | DW987K-2TY1 | Drill |
Model #DC988KATY1 DeWalt drill/driver | DC988KATY1 | Drill assy |
Reviews
Simple Installation!
Remove 4 Torx Screws, from rear cap on the drill. Unplug 1 wire ,Pry out old brush box. Slide in new brush box, replug wire. Repeat on other side . Replace end cap and 4 screws. ( do not over torque screws) DONE! Enjoy the new life your old drill now has!
Maynard, Montana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes