$25.93 |
30% OFF MSRP : $37.00
CONFIRM THE PART FITS
Part Information
This door interlock support (part number WP8206419) is for microwaves.
Door interlock support WP8206419 holds the door interlock switch.
Because the microwave shielding and interlock switches must be properly tested following the door interlock replacement, a service technician should install this part.
Frequently Used Together
- $4.84 |68% OFF MSRP : $15.00
- $6.99 |53% OFF MSRP : $15.00
- $11.59 |45% OFF MSRP : $21.00
- $39.99 |11% OFF Phone Price : $44.99
- $7.73 |59% OFF MSRP : $19.00
- $31.20 |38% OFF MSRP : $50.00
- $35.20
- $22.67
- $25.98 |53% OFF MSRP : $55.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MH2175XSB0 Whirlpool microwave/hood combo | MH2175XSB0 | Interior and ventilation parts |
| Model #MHE16XSD0 Roper microwave/hood combo | MHE16XSD0 | Interior and ventilation parts |
| Model #TMH16XST0 Estate microwave/hood combo | TMH16XST0 | Interior and ventilation parts |
| Model #MH1170XSY0 Whirlpool microwave/hood combo | MH1170XSY0 | Interior and ventilation parts |
| Model #MH1160XSB0 Whirlpool microwave/hood combo | MH1160XSB0 | Interior and ventilation parts |
| Model #MH1170XSY1 Whirlpool microwave/hood combo | MH1170XSY1 | Interior and ventilation parts |
| Model #MH1170XST1 Whirlpool microwave/hood combo | MH1170XST1 | Interior and ventilation parts |
| Model #MH1160XSQ0 Whirlpool microwave/hood combo | MH1160XSQ0 | Interior and ventilation parts |
| Model #MH1170XSQ0 Whirlpool microwave/hood combo | MH1170XSQ0 | Interior and ventilation parts |
| Model #TMH16XSQ0 Estate microwave/hood combo | TMH16XSQ0 | Interior and ventilation parts |
Reviews
MICROWAVE DOOR INTERLOCK SWITCH HOLDER
I had intermittent operation of the unit and a message to close the door when it was closed. I had replaced two of the switches before and in the process, broke the upper switch holder. several months later, the problem reappeared so I ordered a new holder. Removing six screws gave me access to all the parts. A number 10 Torx driver is needed to remove the two holders.
joey, new your city
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend