$76.30 |
8% OFF MSRP : $83.00
CONFIRM THE PART FITS
Range Surface Burner Igniter (replaces 74009336) WP74009336
Part #WP74009336
Online Price
$26.72 |
19% OFF MSRP : $33.00
In Stock
For ZIP codes near Edit
This part fits
Part Information
This surface burner igniter (part number WP74009336) is for ranges.
Surface burner igniter WP74009336 produces the spark that lights the surface burner.
Unplug the range and shut off the gas supply before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $67.17 |7% OFF Phone Price : $72.17
- $34.59 |13% OFF Phone Price : $39.59
- $88.10 |5% OFF Phone Price : $93.10
- $54.79 |8% OFF Phone Price : $59.79
- $35.93
- $98.04
- $34.42
- $37.37 |12% OFF Phone Price : $42.37
- $82.25 |6% OFF Phone Price : $87.25
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #JGCP636ADP12 Jenn-Air gas cooktop | JGCP636ADP12 | Cooktop, burner and grate parts |
| Model #JGC9430BDF13 Jenn-Air gas cooktop | JGC9430BDF13 | Cooktop, burner and grate parts |
| Model #JGC9430BDR13 Jenn-Air gas cooktop | JGC9430BDR13 | Cooktop, burner and grate parts |
| Model #JGD3536WS00 Jenn-Air gas cooktop | JGD3536WS00 | Cooktop parts |
| Model #KGCD807XBL02 KitchenAid gas cooktop | KGCD807XBL02 | Cooktop parts |
| Model #JGS8850CDB01 Jenn-Air gas range | JGS8850CDB01 | Manifold parts |
| Model #JGS8850CDW01 Jenn-Air gas range | JGS8850CDW01 | Manifold parts |
| Model #KGCD807XBL00 KitchenAid gas cooktop | KGCD807XBL00 | Cooktop parts |
| Model #KGCD807XSS00 KitchenAid gas cooktop | KGCD807XSS00 | Cooktop parts |
| Model #JGS8750CDS00 Jenn-Air gas range | JGS8750CDS00 | Manifold parts |
Reviews
Looked good
Could not remove old igniters, so had to replace entire burner assembly. If your unit is older, might be hard to remove old igniter.
Jqpublic, Montrose, co
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Good replacement part
This igniter was easy to install after removing the burner housing.
K. G, Santa Rosa, CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
One screw, one wire connecion, 3 minutes, one screw driver.
Louis44, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes