CONFIRM THE PART FITS
Part Information
This selector switch (part number 8191600) is for vacuums.
Selector switch 8191600 turns the powered floor nozzle off and on and lets you choose between bare-floor or carpet vacuuming.
Unplug the vacuum before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #11625614500 Kenmore canister vacuum | 11625614500 | Hose |
Model #11622812203 Kenmore canister vacuum | 11622812203 | Hose and attachments |
Model #11625512501 Kenmore canister vacuum | 11625512501 | Hose |
Model #11625615506 Kenmore canister vacuum | 11625615506 | Hose |
Model #11625615500 Kenmore canister vacuum | 11625615500 | Hose |
Model #11623312303 Kenmore canister vacuum | 11623312303 | Hose and attachments |
Model #11625614502 Kenmore canister vacuum | 11625614502 | Hose |
Model #11625614501 Kenmore canister vacuum | 11625614501 | Hose |
Model #11625615501 Kenmore canister vacuum | 11625615501 | Hose |
Model #11625513504 Kenmore canister vacuum | 11625513504 | Hose |
Reviews
Easy plug in replacement
Design of the switch allows it to only be installed the correct way in the housing, but make a note of the wire harness colors to each connection before you remove the harness.
SIdebite, SoCal
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
on off switch /sears vacuum with power head !
tough part was getting the handel to come apart after removing the screws . pinching the top cover and prying it up with a thin putty knife . after that write down the wire location and colors . spread the inner handel apart and remove the bad switch . reverse this process to install . carefully hold the handel and test the switch before fully putting the unit back together . be carful good luck .
lucja, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes