CONFIRM THE PART FITS
Part Information
This blade (part number 740296MA) is for edgers.
Blade 740296MA attaches to the drive shaft to cut and edge the grass.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #536772360 Craftsman lawn edger | 536772360 | Edger blade |
Reviews
Bad computer info, good service
I tried to order an edger blade using my edger's model number and the original blade's part number. The computer said my blade was discontinued and unavailable. An after-market blade with a couple letters added to the original part number was shown but the computer said it did not fit my edger. The on-line sales associate confirmed that the part with the extra letters was indeed the correct part. Bought it; installed it, used it. Worked great.
JohnJP, Collegeville, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes-Been installing for 25 years.
Only took 5 Minutes. Only takes two 3/4 inch wrenches.
JimCov, Tenn.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Good parts
Easy to install parts fit and worked like new. Will use again
Gillis, Folsom, La.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Very easy to install
It took longer to remove the nut than it was to remove blade and install the new one.
Robster46, Victoria, Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Simple, even a caveman can do it
Took only a few minutes to install
Mike53HD, Statesville, NC
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Couldn't find elsewhere
It has always been a little difficult to change the blade. You have to manage to clamp a vice grip on the nut behind the blade in order to loosen the nut holding the blade on.
Warthog, Windermere, FL
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Way over priced
At the sears store you would get a package of three blades for 32.00 and here I paid 36.00 plus shipping for one blade. Going to look for other alternatives unless price here ever comes down.
Mario L A, Joliet, Illinois
2 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
It was relatively easy and only took 10 minutes to install
stonewall62, Spearfish
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes