Snapper Snowblower Clevis Pin 725675

Basic Information

• Part name: Snowblower clevis pin
• Manufacturer: Briggs & Stratton
• Category: Snowblower hardware
• Primary function: Connects linkage components by fitting through aligned holes to allow pivoting

Technical Specifications

• Diameter: 3/16 inch

Installation & Compatibility

• Compatible models: Fits select Snapper snowblower models; confirm capability using your models parts diagrams
• Installation Difficulty: Medium; may require partial disassembly
• Tools required: Pliers, hammer

Additional Information

The snowblower clevis pin, part number 725675, slides through aligned holes in linkage components to connect them while still allowing pivoting movement. Its often used with a retaining clip or cotter pin to keep it in place during operation.

If linkage feels loose, does not pivot smoothly, or separation occurs at connection points during use, the clevis pin may be worn, bent, or not fully seated. Excessive play, noise, or misalignment in moving linkages can also point to pin issues.

Disconnect the spark plug wire before beginning the repair. Installing or removing a clevis pin involves metal edges and moving parts, so work gloves can help protect your hands during the process. Make sure the pin is fully seated and secure with its retaining clip before reconnecting the spark plug wire.