$20.36 |
20% OFF Phone Price : $25.36
CONFIRM THE PART FITS
Part Information
This operating thermostat (part number WP694674) is for dryers.
Operating thermostat WP694674 monitors and regulates the temperature inside the dryer.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $39.33 |11% OFF Phone Price : $44.33
- $45.54 |16% OFF MSRP : $54.00
- $52.28 |31% OFF MSRP : $76.00
- $58.19 |8% OFF Phone Price : $63.19
- $3.86 |70% OFF MSRP : $13.00
- $95.42 |9% OFF Phone Price : $105.42
- $48.25 |9% OFF Phone Price : $53.25
- $12.71 |15% OFF MSRP : $14.94
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MLE23PDHYW Maytag dryer | MLE23PDHYW | Blower |
| Model #DG806 Maytag dryer | DG806 | Thermostats |
| Model #1107018011 Kenmore dryer | 1107018011 | Bulkhead assembly |
| Model #LG5751XFW0 Whirlpool dryer | LG5751XFW0 | Bulkhead |
| Model #1107058720 Kenmore dryer | 1107058720 | Bulkhead assembly |
| Model #1107007501 Kenmore dryer | 1107007501 | Bulkhead assembly |
| Model #LG5751XKW1 Whirlpool dryer | LG5751XKW1 | |
| Model #LDE710 Maytag dryer | LDE710 | Motor, blower, base frame & thermostats |
| Model #LDG810 Maytag dryer | LDG810 | Motor, blower, base frame & thermostats |
| Model #DG610 Maytag dryer | DG610 | Motor, blower, base frame & thermostats |
Reviews
Quick and easy
15 minute or less install . Removed back of cabinet . Unplugged thermostat . Took out 2 mounting screws and replaced .
Art50, Jesup , Ga.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Variable temp is very touchy
It is a variable temp control which means if you needed a 170 degree switch ya gotta play with it to get it close. Which means Dryer out, back off, move dial, reassemble test. Be a whole lot easier if the settings were in degrees on the dial, but they are not. Took me 6 times to get it near 120 and I wanted it higher but got fed up with the process.
J. S, Sheffield AL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
10 minute install
All parts well marked and fit first try. Documentation was clear.
Jim t h, California
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
No instructions...for setting temperature.
While I didn't need instructions to install the device, the Thermostat itself is variable, and needs to be set in order to avoid major issues ranging from poor performance or early failure to a fire... After scouring the internet I found the unit has a range of 135 to 155 degrees Fahrenheit. Setting A = 135, B = 140, C = 145, D = 150, and E = 155 degrees. I will gladly pay the extra 50 cents for a guide thank you. What should have been a half hour fix, turned into a 2 hour event. Hope this helps the next buyer.
BrainDeadJones, Chicago
5 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours
If you're not handy don't attempt this
The dryer must be pulled out from the wall along with disconnecting the vent and the gas line. The back of the dryer must be removed, at that point it's only two screws into wires to replace the part. Use the vacuum to clean everything out inside and outside the dryer and the floor And then put it all back together double check your connections turn on and test.
WC s, H. H. ,KY
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
easy to install
my order arrived on time and it was easy to install.
Yeeimy, Bronx
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install.
The Sears video and part drawing was very helpful in determining if I was getting the right part.
joec, Miami, FL
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Quick Install
It only took me about 30 minutes to have the part installed and the dryer working.
boywva, Plato, Missouri
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour