CONFIRM THE PART FITS
Part Information
This splash guard (part number 76894) is for garbage disposals.
Splash guard 76894 prevents water and food debris from splashing out of the disposal during use.
Unplug the garbage disposal or disconnect power before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #17566442 Kenmore garbage disposal | 17566442 | Replacement parts |
| Model #17566510 Kenmore garbage disposal | 17566510 | Replacement parts |
| Model #17566450 Kenmore garbage disposal | 17566450 | Replacement parts |
| Model #6013 Kenmore garbage disposal | 6013 | Unit parts |
| Model #17566602 Kenmore garbage disposal | 17566602 | Replacement parts |
| Model #6011 Kenmore garbage disposal | 6011 | Unit parts |
| Model #17560101 Kenmore garbage disposal | 17560101 | Replacement parts |
| Model #17560121 Kenmore garbage disposal | 17560121 | Replacement parts |
| Model #6012 Kenmore garbage disposal | 6012 | Unit parts |
| Model #17560111X Kenmore garbage disposal | 17560111X | Replacement parts |
Reviews
Splash Guard
Good item. Easy to install. Arrived quickly. Would recommend.
Steve B, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
delivery delay
The part is fine. The fact that I had to wait 2 months to receive it, after I was told it was in stock, Is very troubling. Also, I was not given a phone number or a web page where I could cancel the order, so I had to wait. I will certainly hesitate before ordering from Sears again. Very disappointed in your service.
DOUGLAS S, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Garbage Disposal Splash Guard
Unhooked disposal outlet to sewar, unplugged disposal, released locknut holding disposal to mount, removed old splash guard, installed replacement splash guard, repositioned disposal to mount, secured mount locknut, re-installed J-trap between disposal outlet and sewar, plugged unit back in, ran water and tested unit for appropriate operation
Shary, Albuquerque
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Fitting is simple, but lifting the disposal isn't.
It helps a lot to have a tall stack of wooden blocks to put on the cabinet floor, a thin wooden block to protect the lower end of the disposal, a narrow stick of wood to use as a pivot, and a flat board or pry-bar with which to lever the splash guard (and the heavy disposal) up into its socket and hold it there while you tighten the locking ring. Lubing the new part with a few drops of detergent helps, too.
FLO'67, Philadelphia Suburbs
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
SUPER FAST SHIPPING, FIT PERFECT!
This splash guard was simple to install and fit right in place with the old one. There was no leaking or dripping anywhere.
Ajtedesco86, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- Less than 30 minutes
175.60553
The repair itself was easy to do. The issues you will run into, if any, will be when removing and re-installing the fittings and piping going to the garbage disposal. If you have a leak after reinstalling, you may need to make a trip to the hardware store.
Phil294, Iowa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
WRONG Part
I gave the model number of the Kenmore disposal as I knew the gasket is specific to this model and now I have a gasket which I can not use and I am not sure how to return it or just what to do to get the right part. If Sears can't provide the right part I guess I will have to purchase a new disposal just to replace the splash guard?
Kenmore D, Grand Forks, ND
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes