Kenmore SERIAL NUMBERS keywords and help documents Parts

Yes. Replacement parts for many Kenmore appliances are still available because Kenmore products were built by multiple manufacturers, and many components remain in production or have approved substitutes. The key is matching the correct part to your exact Kenmore model number and SERIAL information using how to find your appliance model number (and what it means for parts).

What to do first (so you get the right part)

• Find the model number on the appliance data plate (not the user interface label).
• Write down the full model number exactly as shown (letters and numbers).
• Note the SERIAL number too; it can help confirm production series for some Kenmore products.
• Identify the appliance type (washer, dryer, refrigerator, range, dishwasher) because model tag locations vary.
• Use the model number to look up diagrams and part lists before ordering.

What “Kenmore parts” usually means

Kenmore is a brand name used across many product types, so parts availability depends on the specific model family and the component you need.

Part type	Typical availability	What to expect
Wear items (belts, filters, rollers)	High	Commonly stocked or easy to substitute
Electrical parts (switches, sensors)	Medium to high	Exact match matters; verify by model
Cosmetic parts (handles, trim)	Medium	Color and revision differences are common
Major assemblies (tubs, sealed systems)	Varies	May be limited on older units

If you cannot find the exact part number

• Search by the full Kenmore model number first, then narrow by section (motor, pump, door, control).
• Compare the old part markings to the diagram listing to confirm you are in the right area.
• Check for “substitute” or “replacement” listings when the original part is discontinued.
• If multiple versions exist, match by mounting style, connector type, and dimensions.

Why it matters

Kenmore parts are model-specific. Two Kenmore appliances that look similar can use different OEM components, so using the exact model number prevents ordering the wrong motor, control board, or door switch.

Last updated: February 2026

Kenmore SERIAL numbers are used to identify when and where an appliance was built; on many Kenmore products, the SERIAL number starts with two letters followed by numbers, and those first letters can indicate the manufacturing date code. Because Kenmore appliances are made by multiple manufacturers, the exact letter-to-date chart depends on the appliance type and the model prefix.

Step 1: Find the SERIAL number on the appliance

Common places to look include:

• Inside the door opening (washers, dryers, dishwashers)
• On the door frame or cabinet edge (refrigerators, freezers)
• Behind the control panel or on the back panel (ranges, microwaves)
• On the side wall inside the unit (some refrigerators and freezers)

Step 2: Identify the manufacturer using the model number prefix

Kenmore model numbers typically start with a 3-digit prefix (for example, 110., 665., 795.). That prefix tells us which manufacturer built the unit, which then determines how to decode the SERIAL number.

What to check	Example	What it tells you
Model number prefix	110.XXXXXXX	Manufacturer family for decoding
SERIAL number format	Letters + numbers	Date plant and sequence codes
Data plate location	Door jamb or frame	Where the official ID is printed

Step 3: Decode the date portion of the SERIAL number

Once you know the manufacturer family, use the correct chart to translate the SERIAL number characters into a month and year.

• Write down the full model number and SERIAL number exactly as shown
• Look for the first 1 to 2 letters or digits that represent the date code
• Match those characters to the correct manufacturer chart
• Use the remaining digits as production sequence identifiers

A fast way to avoid mistakes is to confirm the model number first using our guide: how to find your appliance model number (and what it means for parts).

Why it matters

Reading the SERIAL number correctly helps us match the right Kenmore replacement parts, confirm compatible revisions, and narrow down troubleshooting steps for your specific production run.

Last updated: February 2026

If you can’t find your part for Kenmore model SERIAL, the fastest path is to confirm the appliance’s full model number and then search again using the exact characters. If it still doesn’t appear, we recommend contacting our parts specialists with your model and SERIAL details so we can match the correct replacement.

Quick checks that solve most “can’t find my part” issues

• Recheck the full model number from the appliance ID tag (letters and numbers must match exactly).
• Use the appliance category first (washer, dryer, refrigerator, range) to narrow results.
• Search by the part name (for example: door switch, drain pump, igniter) if you don’t have a part number.
• If you have a part number, enter it exactly as printed on the part label or packaging.
• Look for alternate names (for example: “lid lock” vs “door latch”).

What to have ready before you contact us

Having these details speeds up part matching and helps avoid ordering the wrong item:

What to gather	Where to find it	Why it matters
Model number	Rating plate or ID tag	Ensures the correct parts list
SERIAL number	Same ID tag	Confirms production run variations
Part description	Your notes or photos	Helps identify the correct component
Photos	Part and where it installs	Helps confirm fit and connectors

Why it matters

Kenmore appliances often have multiple versions that look similar but use different parts based on the model and SERIAL range. Using the exact model and SERIAL information helps us match the right part the first time and reduces returns and downtime.

Helpful resource

Use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026

On most Kenmore appliances, the model number is printed on a rating label (model and SERIAL tag) attached to the cabinet or frame, not on a removable part. For Kenmore refrigerators, it’s commonly inside the fresh food compartment near the crisper area or behind the lower kickplate.

Common places to check (by appliance type)

• Refrigerator: inside the door opening on a side wall, on the ceiling, near or behind the crisper drawers, or behind the toe grille (kickplate)
• Washer: under the lid, around the lid opening, or on the back panel
• Dryer: inside the door opening, on the door frame, or behind the lower access panel
• Range/oven: on the oven frame behind the storage drawer, on the side trim, or behind the control panel area
• Dishwasher: on the tub rim (top or side) when you open the door

Quick checklist so you find it faster

• Look for a white or silver sticker/plate that says Model and SERIAL
• Check areas that are visible only when a door/lid is open
• If you see a kickplate, remove it only if it’s designed to pop off easily (no forcing)
• Write the model number exactly as shown (letters and numbers)
• Take a clear photo before ordering parts or searching diagrams

What the label usually looks like

What you’ll see	What it’s used for	Why it matters
Model number	Identifies the exact design	Ensures correct parts fit and diagrams match
SERIAL number	Production code/date info	Helps confirm version changes within a model
Brand name (Kenmore)	Brand family	Narrows search results

Why it matters

Kenmore appliances often have multiple versions that look similar, and the model number is what ties your unit to the right parts list, wiring diagram, and troubleshooting info. Using the exact model number prevents ordering the wrong part and saves repair time.

Helpful next step

Use our guide: how to find your appliance model number (and what it means for parts).

Last updated: February 2026

Kenmore is a brand, not a single manufacturer; Kenmore replacement parts are made by the original equipment manufacturer (OEM) that built your specific Kenmore appliance, which varies by model and product type. The most reliable way to identify the maker is to match your Kenmore model number and SERIAL information to the correct parts list.

How to identify who made your Kenmore appliance

Because Kenmore appliances are sourced from multiple OEMs, the manufacturer is tied to the model number (and sometimes the SERIAL number prefix). Use these steps:

• Find the full Kenmore model number on the rating plate (not the marketing name).
• Write down the SERIAL number as shown, including any letters.
• Search parts by the exact model number to pull the correct diagrams and parts list.
• Compare the model number prefix patterns across your appliances; different products can have different OEMs.
• Use our guide: how to find your appliance model number (and what it means for parts).

Common OEMs that have manufactured Kenmore appliances

Over the years, Kenmore appliances have commonly been produced by major manufacturers. Which one applies depends on the exact Kenmore model.

Kenmore product type	Common OEM examples	What this affects
Refrigerators	Whirlpool, LG, Samsung, Electrolux	Water filters, ice maker parts, door bins
Washers and dryers	Whirlpool, LG, Samsung	Belts, pumps, lid switches, control boards
Ranges and cooktops	Frigidaire/Electrolux, Whirlpool	Bake elements, igniters, surface elements

Why it matters when ordering parts

The OEM determines the correct part design, wiring connectors, mounting points, and compatibility. Ordering by brand name alone can lead to the wrong motor, control board, or door gasket even when two units look similar.

Quick tips to avoid ordering the wrong part

• Match parts to the exact Kenmore model number (for this page, that is SERIAL).
• Use the exploded-view diagram to confirm shape and placement.
• If a part has multiple revisions, match by description and location on the diagram.
• For electrical parts, verify symptoms first with safe testing methods.

Last updated: February 2026