Janitrol Central air conditioner Parts — Browse All Models

Replacing the wall control thermostat for your Janitrol central air conditioner

• Shut off the house circuit breakers for your central air conditioner to disconnect electrical power.
• Remove the cover of the existing wall control thermostat. Follow the instructions in the owner's manual for the existing thermostat to remove its cover.
• Remove the thermostat mounting screws and pull the thermostat out from the wall slightly to access thermostat wires.
• Disconnect the thermostat wires and remove the existing wall control thermostat.
• Connect the wires to the new wall control thermostat.
• Mount the new thermostat to the wall using the mounting screws. Install the thermostat cover.
• Reset the house circuit breakers for the central air conditioner to restore electrical power.

Clearing a clogged condensate drain line in your Janitrol central air conditioner

• Shut off the house circuit breakers for your central air conditioner to disconnect electrical power.
• Pull the float switch out and vacuum water from the condensate drain system through the float switch hole.
• Use a plumber's snake to clear the drain line to the outside of your home.
• Pour water through the drain line to make sure it's clear.
• Reinstall the float switch and restore power to the air conditioner.
• Pour one cup of liquid bleach through the drain line every six months to keep the drain line clear of algae.

When you’re searching for air conditioner repair service, choose Sears Home Services as your trusted service provider. We’ll fix your AC right.