CONFIRM THE PART FITS
Part Information
This handle (part number 31305450G) is for hedge trimmers.
Remove the battery pack before installing this part. Wear work gloves to protect your hands.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #315CR2600 Craftsman hedge trimmer | 315CR2600 | Trimmer |
Reviews
So far so good
Would have been nice if screws were included with handle . The amount I paid for replacement handle you would think they should be included.
Mad m, Dunkirk NY
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- Less than 30 minutes
Handle replacement
Not that easy to install, and took more effort than expected. Save the screws from your old broken handle. Impossible to get it wrong, but that is what made it tricky. You may need special tools.
JMP1961, Texas
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Very easy to install
I actually had it installed in less than 10 minutes.
R. W, Eastman , Ga.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Be sure to keep screws from old handle. cannot be installed as a combined unit. Easy work, about 20 minutes including finding a screwdriver!
Florida G, S FL
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Very difficult to install.
It was very difficult to install. And it has screws missing. In fact no screws came with it and there was no indication on the website and the diagram of an existing screws at all on the handle part itself ,not where it attaches to the actual hedger. I'lla think twice about using Sears next time
JoZe, Florida
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Did not come with necessary screws
It was not difficult to add the handle on to the hedgetrimmer however the part came with no screws. So I had to dig through my screwbox to find the 8 screws or so needed.
jezza, Tampa, FL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Easy to buy, easy to install
Simple install, fit right, works like original part.
Little W, Thorp, WA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
No screws
Needed six screws to hold handle halves together. The two halves could had come already screwed together which would had made the install easier than having to locate screws that would work.
Longjohn, Arizona
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour