MTD Snowblower Auger Spacer, Right 750-05393

Basic information

• Part name: Snowblower auger spacer, right
• Manufacturer: MTD
• Category: Snowblower hardware and spacers
• Primary function: Maintains proper spacing on the right side of the auger assembly to keep components aligned

Installation & compatibility

• Compatible models: Fits select MTD snowblowers; may also fit other brands, confirm compatibility using your models parts diagrams
• Installation difficulty: Easy; requires placing the spacer in the correct position on the auger shaft or assembly
• Tools required: Wrench set, pliers

Additional information

This snowblower right auger spacer, part number 750-05393, fits between components on the right side of the auger assembly to keep them properly spaced so the auger turns freely and stays aligned. It helps prevent parts from rubbing or interfering with each other during operation.

If the spacer wears down, cracks, or goes missing, components can sit too close together, which may cause rubbing, noise, or binding in the auger assembly. Misalignment can also lead to uneven wear on bearings, shafts, or other nearby parts, affecting performance.

Disconnect the spark plug wire before starting the repair to prevent accidental startup. Auger and hardware components can have sharp edges, so wearing work gloves can help protect your hands during installation. Make sure the spacer is seated correctly and the auger turns freely before returning the snowblower to service.