CONFIRM THE PART FITS
Part Information
This reed valve kit (part number KK-4275) is for air compressors.
Reed valve kit KK-4275 includes 4 flapper valves and 8 mounting screws.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #919176740 Craftsman air compressor | 919176740 | All parts |
Model #919170210 Craftsman air compressor | 919170210 | Air compressor |
Model #919156610 Craftsman air compressor | 919156610 | All parts |
Model #919157150 Craftsman air compressor | 919157150 | All parts |
Model #919175261 Craftsman air compressor | 919175261 | Compressor pump |
Model #919176431 Craftsman air compressor | 919176431 | All parts |
Model #919175960 Craftsman air compressor | 919175960 | Compressor pump |
Model #919178531 Craftsman air compressor | 919178531 | Unit parts |
Model #919176920 Craftsman air compressor | 919176920 | All parts |
Model #919176720 Craftsman air compressor | 919176720 | All parts |
Reviews
Did not have the correct parts included in kit.
The kit worked OK and was supposed to have 2 intake and 2 exhaust valves, be instead had 1 intake, 2 exhaust and 1 retainer (different part altogether).
Paul907, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
as predicted
Part was as expected. Arrived on time in good condition
rrtmommy, Maine
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
easy to install
East to install. make sure to identify intake and exhaust reeds and put them in the proper place. Head gasket needed to complete repair was not available, had to order from another supplier. What good is the reed repair kit if you can't obtain all parts needed to finish the job.
mike321, Easton, PA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Valves were junk
One of the new valves disintegrated after perhaps an hour of use. Luckily, I kept the original valves and put them back in.
Steve315, Burnet, Texas
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Be sure to read the instructions.
Only 1 failed, but I replaced all 4. The intake and exhaust valves are slightly different. Also you need to buy the 2 gaskets for the head. I had to search online to find the head torque value of 25-30 ft lb. I would bye again if needed.
bertbo, wa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Compressor reed valve repair
Parts arrived on time,and fit was perfect.somewhat pricey.could have been delivered by regular mail.
JTP 5, Erie Pa.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour