CONFIRM THE PART FITS
Part Information
This beater bar belt (part number 5110) is for vacuums.
Beater bar belt 5110 connects the motor pulley to the beater bar shaft to spin the beater bar.
Follow the instructions in your owner's manual when installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #11931015790 Kenmore upright vacuum | 11931015790 | Base |
Model #11931012790 Kenmore upright vacuum | 11931012790 | Base |
Reviews
Not simple, but easy
It comes down to the five deep screw holes in the bottom of the head unit; the canister section can be removed by pressing the dark blue piece at the bottom. With that removed, you can remove those five screws, then split the top from the bottom. Once inside, there are only three main components. Each is only held in by two or three screws; keep those separate and you'll be able to put it back together.
Jeepman4eva, Cape Cod, Ma
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour