CONFIRM THE PART FITS
Part Information
Drill press crank handle 10601009A1 is an original equipment manufacturer (OEM) part that fits some Craftsman 137-series and Jet model JDP-17MF drill presses.
Crank handle 10601009A1 lets you raise and lower the work table when you turn the handle.
Install the table crank handle to the worm gear shaft on the side of the table support. Line up the flat side of the shaft with the set screw in the crank handle and tighten the screw with an Allen wrench.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #137229130 Craftsman drill press | 137229130 | 13" varialbe speed drill press |
| Model #137229151 Craftsman drill press | 137229151 | |
| Model #137273570 Craftsman drill press | 137273570 | |
| Model #137229150 Craftsman drill press | 137229150 | Unit parts |
| Model #137273370 Craftsman drill press | 137273370 | All parts |
| Model #137229340 Craftsman drill press | 137229340 | 34" drill press |
| Model #JDP-17MF Jet drill press | JDP-17MF | Drill press |
| Model #137229250 Craftsman drill press | 137229250 | |
| Model #137273350 Craftsman drill press | 137273350 | Unit parts |
| Model #137280090 Craftsman drill press | 137280090 | All parts |
Reviews
Perfect!!
I have an older Craftsman stand drill press. With a little coaxing (a slight tap with a rubber mallet), it fit perfectly.
toolgirl, Eastland, TX
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
very easy to install
All it needed was to have a hex wrench and 5 minutes later...replaced
Uptcreek711, Maryville, TN
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
The right part
When I went to the product top assy. (drill press), the first item up was the handle I needed, which tells me that it is a high failure item, might need a redesign.
the b, California
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Exactly what I wanted at the best price on the NET
This crank handle is definitely OEM, nice build for sure. It was shipped to me promptly and I had it installed in a minute once I got it. I love SEARS for having this great service.
Ricster, Denver
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
easy to install
It was easy to install and only took 15 minutes and it was an exact duplicate as the original
Camo B, Utah
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Replaced handle with Allen wrench, easy off, easy on.
Harbourholly, Lynchburg, va
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Replace broken handle
Replaced a broken table lift handle. Took less then 1 minute
DonR, Cape cod
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Replacing part on older machine
Part match broken part exactly. Handle broke from a 15 year old machine.
Kendallwood, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes