$10.89 |
16% OFF Phone Price : $12.89
CONFIRM THE PART FITS
Part Information
This indicator light (part number 4164351) is for cooktops.
Indicator light 4164351 lights up when a cooking surface is hot or a burner is on.
Shut off the breaker to the cooktop before installing this part.
Frequently Used Together
- $6.29 |14% OFF Phone Price : $7.29
- $21.89 |19% OFF Phone Price : $26.89
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #KECS100SBC6 KitchenAid electric cooktop | KECS100SBC6 | Replacement parts |
| Model #KECS100SWH1 KitchenAid electric cooktop | KECS100SWH1 | |
| Model #KECS100SAL5 KitchenAid electric cooktop | KECS100SAL5 | Cooktop |
| Model #KECS100SWH6 KitchenAid electric cooktop | KECS100SWH6 | Replacement parts |
| Model #KECS100SBC4 KitchenAid electric cooktop | KECS100SBC4 | Replacement parts |
| Model #KECS100SOB4 KitchenAid electric cooktop | KECS100SOB4 | Replacement parts |
| Model #KECS100SAL4 KitchenAid electric cooktop | KECS100SAL4 | Replacement parts |
| Model #KECS100SOB6 KitchenAid electric cooktop | KECS100SOB6 | Replacement parts |
| Model #KECS100SAL6 KitchenAid electric cooktop | KECS100SAL6 | Replacement parts |
| Model #KECS100SOB5 KitchenAid electric cooktop | KECS100SOB5 | Cooktop |
Reviews
Perfect part that nobody else's carried
So glad to have Sears Parts to get this part nobody else carried. Perfect fit. Be careful as replacing it requires you turn the breaker off - 220 Volts can be deadly !!!
Timmy, Detroit
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Kitchen Aide Electric Cook Top Warning light
Just reconnect the 2 prongs after disconnect the old one. Make sure the power is turned off to do this
tkh2012, Walnut Creek, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replacing cooktop neon indicator light
It took about 23 minutes to complete. Turn off the circuit breaker, unscrew and hold up the cooktop, remove the wire clips and old light. Push new light into place and put the wire clips back on. Lower cooktop into place and put the screws in. Turn on the breaker. Works ok. Thanks
Mike59, New York
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy but...........
Easy to install. But, the integrity of the replacement lamp was not good.
GSAM, Denton
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes