$11.09 |Â
15% OFFÂ Phone Price : $13.09
CONFIRM THE PART FITS
Freezer Door Gasket (replaces 216522370) 5304505782
Part #5304505782
Online Only Price
$177.48 |Â
5% OFFÂ Phone Price : $187.48
In Stock
For ZIP codes near Edit
This part fits
Part Information
Special details: Smooth folds and creases in gasket 5304505782 by soaking it in warm water or warming it with a hair dryer on low heat.
This door gasket (part number 5304505782) is for freezers.
Door gasket 5304505782 creates a seal around the door to prevent warm air from entering the freezer.
Safely store any food that could deteriorate while the power is off and unplug the freezer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $12.71 |Â22% OFFÂ MSRP : $16.34
- $60.21 |Â8% OFFÂ Phone Price : $65.21
- $100.88 |Â9% OFFÂ Phone Price : $110.88
- $29.93 |Â14% OFFÂ Phone Price : $34.93
- $146.15 |Â6% OFFÂ Phone Price : $156.15
- $11.40 |Â15% OFFÂ Phone Price : $13.40
- $24.59 |Â17% OFFÂ Phone Price : $29.59
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #FGRU19F6QFD Frigidaire refrigerator | FGRU19F6QFD | Door |
| Model #FPRU19F8RFC Frigidaire refrigerator | FPRU19F8RFC | Door |
| Model #FPRU19F8RFB Frigidaire refrigerator | FPRU19F8RFB | Door |
| Model #E32AR75JPS0 Electrolux refrigerator | E32AR75JPS0 | Door |
| Model #E32AR85PQSC Electrolux refrigerator | E32AR85PQSC | Door |
| Model #FPGU19F8TF0 Frigidaire refrigerator | FPGU19F8TF0 | Door |
| Model #EI32AF80QSA Electrolux upright freezer | EI32AF80QSA | Door |
| Model #E32AF85PQSC Electrolux freestanding freezer | E32AF85PQSC | Door |
| Model #E32AF85PQSA Electrolux upright freezer | E32AF85PQSA | Door |
| Model #EI32AF80QSD Electrolux upright freezer | EI32AF80QSD | Door |
Reviews
Less than impressed
Gasket is misshapen and doesn't seal well at all. Not good.
Joe C, USA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Freezer door gasket
It was tedious to install due to the number of screws holding the gasket and getting positioned properly , but the door seals completely now.
Bill, Cedartown, Ga.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Very low quality magnet. Will not seal the door
Horrible and complete waste of money. The 'new' seal has a very low quality magnet that will not hold.
Avizer, Florida
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not too hard to install.
Start at bottom and work your ways upward. I did the opposite and it is tough working the hard part on the bottom.
Larry, Knoxville
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Remove to door to install the gasket
Remove the door and lay it on the floor. Preheat the gasket and work fast. The silicone seal works best without moisture but the instructions miss all of the useful installation information. My I NEVER purchase another Sears product!
Dissatisfied 1, New Orleans, LA
3 people thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
wrinkled useless gasket
I ordered a new fridge gasket. It was shipped in a small box wrinkled a pre ruined. When installed it leaked worse than the old. The condensation from leaking fridge gasket has now ruined my kitchen floor.
Hortonwho, Essex, NY
3 people thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Better than what originally came with the fridge.
Very easy. At first I wasn't sure this would fit the fridge since the part only says freezer. They're both the same thing for this model. This part also looks like a revised version of the gasket, so hopefully it doesn't tear like the last one.
ivanp, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Diy
Read instructions first you will need the heat gun for the wrinkles
John 1, Upstate new york
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour