CONFIRM THE PART FITS
Air Compressor Pressure Regulator CAC-4296-1
Part #CAC-4296-1
Part Information
This pressure regulator (part number CAC-4296-1) is for air compressors.
Pressure regulator CAC-4296-1 adjusts the pressure of the air coming from the tank to the desired level.
Unplug the air compressor and bleed the air pressure from the tank before installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #919165282 Craftsman air compressor | 919165282 | Compressor |
Model #919165380 Craftsman air compressor | 919165380 | Compressor |
Model #919152041 Craftsman air compressor | 919152041 | Air compressor diagram |
Model #919165370 Craftsman air compressor | 919165370 | Compressor |
Model #919165090 Craftsman air compressor | 919165090 | Air compressor diagram |
Model #919165231 Craftsman air compressor | 919165231 | Air compressor diagram |
Model #919153420 Craftsman air compressor | 919153420 | Unit parts |
Model #919155731 Craftsman air compressor | 919155731 | Air compressor diagram |
Model #919167350 Craftsman air compressor | 919167350 | Air compressor |
Model #FB5520VP Devilbiss air compressor | FB5520VP | Air compressor unit |
Reviews
Perfect fit easy to install !!
15 -20 minute job. Had to remove a few air lines, but still an easy install . No problems.
Big P, Cerro Gordo , nc
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Installed in ten minutes, was not hard to perform.
Name N N, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Piece of Cake.
Simple installation. Even Forrest Gump could do it.
super t, Delaware
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy replacement. Compressor is back up and going.
Easily installed and compressor is back up and running
Trucker, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Straightforward to install
Breaking the seals to remove the old regulator required some time & effort because there are three threaded connections. The previous joint compound had hardened. After removing the old regulator, I cleaned the male threads on the tank using a wire brush. Then I applied Oatey Great White pipe joint compound with PTFE to the threaded connections. This made it easy to install the new regulator because the joint compound also acts like a lubricant. After re-assembly, I tested the air compressor and made sure there were no air leaks. It was a straightforward install that took 1-2 hours.
andyho, Gainesville, FL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
GOOD REPLACEMENT PART
Regulator was an exact fit for my old Craftsman compressor Was deliver as promised Took longer to install because I also replaced the switch system
Tony B, Waterford, Ct
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Very easy to install
Took about 15 minutes, 2 wrenches, unscrew the regulator and screw in the replacement part
Bill J, Syracuse Indiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour