Dishwasher Door Latch and Handle Assembly (Black) WPW10130695

Part was exactly what was needed. Fit and finish was just like OEM part.

T his is the second time I have replaced the handle this time around I opted to install the complete unit with the microswitches as a routine precaution so that this repair will last a long time. One note you will need a special screwdriver with a Torx bit to get the screws out. Also you can use a small screwdriver to get the terminal wires loose. Just set it at the bottom of the connection and gently pry . Its also a good idea to unplug the dishwasher before you start. Once ou remove the back plate to the door then installation is quick and simple. Unplug your wires (watch where they go) plug in to the new switch and reinstall the panel. Before you do check the handle to make sure it is working right

Handle was easy to install. Thought it would be white, but doesn't look too terrible (and must not have seen the black in the description). Works well.

It was very easy to do. Remove the door back cover and it’s right there. Don’t forget to turn the power off first.

Very easy to install after removing inside cover of the door.

Easy to install and did the trick in just a few minutes.

Very simple to replace, and good quality part. Don't forget to disconnect power first!

Easy install, works perfectly!! Would definitely order again!!