MTD Snowblower Spacer 750-05414A

Basic information

• Part name: Snowblower spacer
• Manufacturer: MTD
• Category: Snowblower hardware and spacers
• Primary function: Maintains proper spacing between components to ensure correct alignment and smooth operation

Technical specifications

• Inside diameter: 0.325 inch
• Outside diameter: 0.496 inch
• Length: 1.52 inches

Installation & compatibility

• Compatible models: Fits select MTD and Craftsman snowblowers; confirm compatibility using your models parts diagrams
• Installation difficulty: Easy; requires placing the spacer in the correct position on the shaft or assembly
• Tools required: Wrench set, pliers

Additional information

This snowblower spacer, part number 750-05414A, fits over a shaft or between components to maintain the correct distance so adjoining parts stay aligned and operate smoothly. It helps prevent rubbing, binding, and premature wear caused by improper spacing.

If the spacer wears down, cracks, or goes missing, adjacent parts can move too close together, which may cause noise, binding, or uneven wear during operation. Misaligned components can reduce overall performance and increase stress on other parts.

Disconnect the spark plug wire before starting the repair to prevent accidental startup. Components near the spacer can have sharp edges, so wearing work gloves can help protect your hands during installation. Make sure the spacer is seated correctly and the assembly moves freely before using the snowblower.