Washer Drain Pump WD-5470-09
Part #WD-5470-09
Part Information
Drain pump WD-5470-09 is an original equipment manufacturer (OEM) part that fits Haier washer models GWT450AW, GWT460AW, HLP23E, HLP24E, HLPW028AXW, RWT150AW, RWT350AW and RWT360BW.
Drain pump WD-5470-09 removes water from the washer during the drain portion of the cycle.
This drain pump is rated at 30-watts using a 115-volt, 60-Hz power supply.
Reviews
Easy to install
Straight forward about 30 minutes take bottom cover off the lay washer down, cut cable ties, remove 2 screws holding it on the washer, remove bracketinstall bracket on new pump. Follow wires to cluster, cut the red and white wires strip wire shielding, use wire nuts instead of electrical tape.
Gsimoes, Lost Angeles
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
A monkey could do it.
WasherDrain pump very easy install an monkey could have done it for me. But I'm short on monkey's so I did it in less than 15 minutes.
Mrhudson, 41051
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes