Lifestyler Assembly 144756

Elliptical Repair

We replaced one of the flywheel bearings as well as the drive belt. Fairly straightforward procedure: Remove the screws holding the covers on (there are several screws). Loosen the hardware holding the flywheel. Take off the belt, and remove the flywheel. We had to get creative in removing the failed bearing as there wasn't much to grab on to. Reinstall the new bearings, and install the flywheel. To replace the belt we had to remove one of the foot skis, the belt came with new clamps. Tighten all hardware and double check the re installation order. Reassemble hardware and give it a test.