Planer Blade, 2-pack 17326
Part #17326
Part Information
This blade (part number 17326) is for planers.
Blade 17326 fastens to the cutter head.
Disconnect the power cord before installing this part. Wear work gloves to protect your hands.
Reviews
Some modifications necessary
The new black screws fits really snug inside the slots in the brackets. This prevents the blades from moving down compare to the original parts on the planar which has some slack. The hex mounting screws can't fit thru the round holes because they are too small. I had to drill thru using a 1/4' bit. Only other issue is lining up the blades to the planar. Glad they still carry the parts otherwise my planar will be useless.
diy1698, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
unable to install
The blades were fine. The locking plates and screws were poorly matched, and with the screw heads unable to fit inside the slotted holes. The manual clearly states new screws must be used. Had to use old plates. The tool remains useless, however, because Sears (and no one else) can replace the brushes or brush tubes for this electic hand planer. You also can't get the adjustment plate tool necessary to set the blades properly in the cutting head. For the want of a nail, the kingdom was lost.
Raoul T, NC
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Rare, hard to find blades
Although priced on the high side, these blades fit several tools that are no longer supported by the manufacturers. A great find for those facing obsolescence.
NYNick, Charlotte
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes